POE5004G-V2 PoE Extender is a cost effective way to extend the PoE or Ethernet network range beyond 100m/250m(Max). Deliver Ethernet (10/100/1000Mbps) and power (30W Max) for PoE terminal device like WLAN AP, PTZ, IP Camera, etc with no require of local power. Comply IEEE802.3af/at/BT PoE standard. PoE Input:1 RJ45 PoE port PoE Output:4 RJ45 PoE port Input Power:60W Max (802.3BT, PoE++, Hi-PoE) Output Power:30W Max (802.3af) Note: 1. This Extender is not a PoE Switch, it can not work without powered by PoE Switch/PoE injector/PoE NVR 2. 60W total power budget need to powered by 802.3BT source 3. To prevent the water seeping into the extender, please keep PoE extender wet environment 4. Please don't place any heavy thing on the PoE extender Output Voltage:48V Transfer rate:10/100/1000Mbps Normal Mode:Max 100M PoE Extend Distance VLAN Mode:Max 100M PoE Extend Distance Extend Mode:Max 250M PoE Extend Distance Network Cable:Cat5, Cat5e ,Cat6 or better Repeater Mode:Store and forward Address Table:8K Packet Buffer Memory:126 Switching Capacity:8000Mbps PoE Standard:IEEE 802.3af/at/BT Power Supply Type:1/2+,3/6-,ModeA,End-Span Network Protocol:IEEE 802.3i-10BASE-T, IEEE 802.3u: 100BASE-TX, IEEE 802.3x-Flow Control, IEEE 802.3af/at/BT Regulatory Compliance:IEEE802.3af/at/BT, RoHS Compliant, , FCC Storage Humidity:5%-90%, No Condensation Operating temperature:-35-75 Weight:173g Colour:Black Material:Plastic+Metal Size:95x70x21mm(LxWxH) Package Contents: 1 * PoE Extender Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.