set2: 1x Watering hose & 50x Nozzle + 50x Tee ConnectorIt can be directly inserted on the PE pipe,convenient connection.Normal Connection:Suitable for 1/4 Inch irrigation.Adjustable,the misting nozzle can be adjusted to closed,misting,and spraying.Tee Connector make it reverse hook spraying,large amount of water.It is used in a variety of planting areas,it is beneficial to all kinds of places where water is needed.The nozzle atomization effect is very good,a large range,can also be adjusted to a thin water line,from the air to fall into a light rain effect.It is very firm and will not fall off when the water pressure is high.It is practical,light,flexible,simple,and has strong wear resistance and long service life.Function:Use as the main line in a small Drip irrigation system or to branch off from larger 1/2 inch Drip tubing to -watering system.Compatible with most of 1/4 inch Barbed Fittings, Spot Watering Emitters, -Bubblers, Misters and Sprays.Perfect for small, narrow and tight planting areas, as well as areas with tight curves or many switchbacks. Designed for underground or above-ground installation.Color:black+gray/blackmaterial:plasticUp To 70% Water Savings:Eliminates wasteful overspray and runoff of overhead sprays and hose end sprinkling. Less Weeding: Waters the plants, not the surrounding soil.Where To Use Drip IrrigationVegetable Gardens and Mixed Planting BedsFlower Boxes and Containers.Shrubs, Trees and Dense Planting Areas.Outside diameter: 1/4 inchInside diameter: 0.17 inchWall thickness: 0.04 inchPressure rating: 25 to 45 PSIEasy to cutNo need for special props, just a small scissor can be cut effortlesslySoft and flexibleVery soft and easy to installHigh Qualitywith its flexible design, soft material and 3 mm THICK pipe, no worry burst in winter.size:30mPackage Contents:1x Watering hose50x Nozzle50x Tee ConnectorOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.