Feature: 1. Light and convenient, comfortable to hold, independent power switch, easy to operate. 2. Equipped with metal bracket, high quality aluminum nozzle, anti‑scald protective cover, to protect children while doing manual work. 3. Made of high temperature resistant plastic, equipped with a built‑in ring to prevent the glue stick from flowing backwards, and the insulation heater is installed in the body, so that the service life is longer. 4. Adopts high‑tech PTC thermistor as heating elements, with fast heating speed and accurate constant temperature. 5. In the process of use, if one glue strip can not use up at one time, the glue strip need not be taken out, and can be plugged in for preheating for 1 minute before direct use when you need to use again. Specification: Condition: 100% Brand New Item Type: Hot Melt Glue Gun Material: Plastic, Aluminum Nozzle Material: Aluminum Color: As Picture Shown Power: 100W Operating Voltage: US Plug 100V-240V Glue Spitting Frequency: 10 (times/min)Frequency: 50-60HZ Indicator Light: LED Glue Stick Diameter: Approx. 10.5-11.5mm/0.4-0.5inFeatures: 1. This product adopts high-tech PTC thermistor as heating elements, with fast heating speed and accurate constant temperature. 2. It can be normally used in the AC power supply between 100V and 240V, which is not limited by voltage fluctuation. Built-in safety fuse makes it safer to use. Usage:1. This series of products can be applied to strips with a diameter of 10.5-11.5mm/0.4-0.5in (NOT Included). 2. Insert the glue strip from the end of the tool and send it to the barrel. After plugging in the power source to preheat for 1 minute, pull the trigger can extrude the glue and the amount of glue can be made under control 3. In the process of use, if one glue strip can not use up at one time, the glue strip need not be taken out, and can be plugged in for preheating for 1 minute before direct use when you need to use again.. Package List: 1 x Hot Melt Glue Gun