Feature: 1. Clean and Smooth Cutting: Rapid heating, the tube reaches 150 degC in 10 seconds. It can cut the styrofoam smoothly and quickly, and seal the edges cleanly without debris You can cut the board or foam block from any angle into the shape you want. 2. On/Off SwtichLED Indicator: The ON / OFF switch is on the handle and is very convenient to open and close, so you don't have to keep shunting all the time There is also an LED next to the switch most foam cutters don't have it, it will open at work, so you don't have to worry about forgetting it, accidentally touching it. 3. Rugged Quality and Comfortable Grip: The cutting pen/needle/rod is strong on the base, very strong, and does not bend too much through the bulk styrofoam. The handle is good thickness and does not slide, so you can Get a full handle that won't get bigger projects 4. Product Maintenance: Please let it rest when the cutter keeps working for about 45 minutes. We have two foam cutters, one replacement. 5. Application: Suitable for low-density polystyrene foam, artistic modeling, student hand-made, advertising production. Specification: Material: Stainless Steel The Heater Tube Diameter: 2mm The Heater Tube Length:L 10cm Total Length: 25cm Working Power: 15W Electronic Adaptor: Input: 100-240V Output: DC 6V 2.5A Use Attention: Different lengths of Electric Pen can not be mixed, each heating pen has its own independent power, mixed or not hot will cause burning. 1. The cutting pen heating tube can only be bent once, and cannot be repeatedly bent at one point. Repeating bending at one point may cause breakage. 2. Because of its special structure, the cutting pen can only cut medium and low density foam, can not cut materials other than foam, and is not suitable for high density or batch cutting. 3. Continuous cutting does not exceed half an hour, the cutting pen power supply has a switch, and the power supply can be extended after cutting. Package List: 1 x Foam Cutting Machine Pen 1 x Power Adapter