Features 1、Low insertion loss (≤ 0.18 dB) 2、Good performance on mutual inserting and repeatability. 3、Large return loss (PC≥45db UDC≥50db APC≥60db) 4、Excellent temperature stability ( -40 - 80℃) Strong tensile performance, ensure long-time use. 5、Good inter-plug performance Specification Features: Low insertion loss (≤ 0.18 dB) Good performance on mutual inserting and repeatability. Large return loss (PC≥45db UDC≥50db APC≥60db) Good inter-plug performance Excellent temperature stability ( -40 - 80℃) Strong tensile performance, ensure long-time use. Specification: Type: SC-SC Fiber Jumper Insertion loss: single mode ≤ 0.18 dB Return loss: PC≥45db UDC≥50db APC≥60db Number of insertions and withdrawals: 1000 or more Tensile strength: 45KG Working temperature: -40 - 80℃ Weight: Approx. 76g Length: Approx. 10m / 11yd Package list: 1 * Patch Cord Note: Please allow slight error due to manual measurement. Thanks for your kind understanding. Project Test Conditions Single mode Multimode Optical factor Insertion loss UPC SM: 1310nm/1550nm MM: 850nm/1300nm ≤0.2dB ≤0.3dB APC 1310nm/1550nm ≤0.3dB Return loss UPC SM: 1310nm/1550nm MM: 850nm/1300nm ≥55dB ≥35dB APC 1310nm/1550nm ≥65dB Mechanical factor (additional loss) Impact test 1.8m, 8 times ＜0.1dB ＜0.1dB Vibration test 10-60Hz, 1mm Full amplitude ＜0.1dB ＜0.1dB Insertion life ＞100n ＜0.1dB ＜0.1dB Tensile strength ＞100n ＜0.1dB ＜0.1dB Environmental factor (additional loss) High and low temperature cycle test -25℃ - +70℃, 2 cycles ＜0.2dB ＜0.2dB High temperature test +80℃, 2 Hours ＜0.2dB ＜0.2dB Low temperature test -40℃, 2 Hours ＜0.2dB ＜0.2dB Warm test +40℃, 90-95%RH, 2Hours ＜0.2dB ＜0.2dB Package List