Feature: 1. Suitable for cleaning glasses, rings, coins, jewelry, industrial parts, hardware tools, watches, dentures, surgical instruments, PCB circuit boards. 2. Ultrasonic working time is 1-20 minutes, heating temperature is up to 80 °C, suitable for different occasions. 3. Improve conversion efficiency and safety with safe and efficient transducers. 4. The shell is made of high quality anti-fingerprint stainless steel embossed plate, which is beautiful and elegant. 5. The cleaning tank is made of high quality stainless steel in one step stamping forming, no welding parts, better waterproof performance. 6. High-quality components, high ultrasonic efficiency, powerful power, good cleaning effect. 7. Using the most advanced bonding technology in Germany, never wear cylinders, the cylinder does not fall off. Specification: Item Type: Ultrasonic Cleaner Model: 1027HT Type: Mechanical Timing Heating Inner Tank Capacity: 30L Inner Groove Size: Approx. 500 x 300 x 200mm / 19.7 x 11.8 x 7.9in Dimensions: Approx. 550 x 330 x 380mm / 21.7 x 13 x 15in Ultrasonic Frequency: 40KHz Ultrasonic Power: 600W Heating Power: 500W Number Of Vibration Heads: 10 Working Time Range: 1-20Min Temperature Range: 0-80 ° C Liner Material: SUS304 Stainless Steel Shell Material: Stainless Steel Basket: Equipped Sound Reduction Cover: Equipped FAQ: Q: What is an ultrasonic cleaner? A: Ultrasonic cleaning is based on the cavitation effect caused by high frequency ultrasonic wave vibration signal in the fluid. Microscopic bubbles are formed, and then implode violently causing the cavitation which create an intense scrubbing action on the surface of the item being cleaned. The bubbles are small enough to penetrate microscopic crevices, cleaning them thoroughly and consistently. Q: Which products can this ultrasonic cleaner cleaning? A: Many products can be cleaned. Common such as glasses, necklaces, earrings, bracelets, electronics, watches, dentures, printer ink heads, razor heads, nibs, coins, badges, pacifiers, etc. Q: Which builders can be properly added for better cleaning during the cleaning process? A: You can add cleaning liquid or detergent, such as: dish detergent, soapy water, disinfectant, etc., but do not add acidic or alkaline solution to the machine to prevent ABS corrosion damage. Operation process: 1. After unpacking, shake the machine slightly and listen to the sound in the chassis to confirm whether the parts are loose. 2. Place the machine in a ventilated and dry place to ensure that the machine is in a horizontal position; 3. Add an appropriate amount of cleaning solution (2/3 groove depth