Specification: 1. Mold can be easily removed using this product. The gel texture can be used on vertical or angled surfaces. 2. Can make cleaning more fun and easier. 3. Easy and fast to use. Notice: 1. Due to different monitors and light effects, the actual color may be slightly different from the image. Please allow slight deviations due to manual measurement. Specification: Type: Fungus Remover Capacity: 120g Ingredients: sodium hypochlorite, hydroxide, etc. instruct: Step 1. Use a dry towel to wipe off the dust and moisture on the surface of the mold. Step 2. Open the product cover and place it about 3mm thick on the mold. Leave it for 3 5 hours and wipe with water. Step 3. Confirm the sterilization effect, if it is not completely removed, please repeat. Precautions for use: 1. Do not use it beyond its intended purpose. 2. Maintain ventilation when using. It is recommended to wear rubber gloves. 3. Close the lid after use and keep out of the reach of children. 4. If it accidentally touches the skin or eyes, wash immediately with water. 5. If accidentally swallowed, drink water, induce vomiting and seek medical advice immediately. 6. Color may fade on clothes, so be careful. 7. Metallic yellow silica gel will have no effect on discolored or colored parts. 8. The sterilization effect will vary depending on the degree of contamination. 9. If the product is frozen or near a heat source, the product will become thinner. packing list: 1 x mildew remover