1Made of high quality material, durable in use. 2Compact structure, light weight, easy to store. 3Flexible, safe and reliable operation. 4It has the advantages of stable rotating speed, low noise and energy saving. 5Suitable for school teaching, pottery bar or home use, meet the majority of professional, amateur ceramic enthusiasts. Features: Made of high quality material, durable in use.Compact structure, light weight, easy to store.Flexible, safe and reliable operation.It has the advantages of stable rotating speed, low noise and energy saving.Suitable for school teaching, pottery bar or home use, meet the majority of professional, amateur ceramic enthusiasts.Specification: Material: Aluminum Alloy Weight: 1496g/52.8oz Power Adapter: 12V DC No-load speed: 1500RPM Rotary Wheel Diameter: 8.5cm/3.3inch Rotary Wheel Thickness: 3cm/1.2inch Machine Body Size: 15*15*7cm/5.9*5.9*2.8inch Package List: 1 x Ceramic Machine 5 x Wooden Clay Tool 6 x Aluminum Clay Tool 1 x Hexagonal Screwdriver 1 x Charger Note: Operation note: 1. Roll the clay into a cylinder, fix it in the center of the turntable and press it. 2. Use the ceramic tool alignment center to slowly open the hole, then slightly expand outward a bit. 3. Use ceramic tools to shape and trim the profile of your work. 4. Keep the rotating disc at constant speed and dry the work surface with a spray gun/ hot air gun. 5. Use tools from top to bottom to modify, and finally fix the bottom 6. After the work is completed, the work can be cut off with a scraper or a knife-edge tool7.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering. Suggestions: 1. Get smaller pieces of mud 2. Don't rotate too fast and slow at a slower speed. 3. When shaping, you can stretch it out a bit thicker and then thin it out slowly. 4. Use clay tools to assist molding, less water.