Description: 100% new high quality. Color: As the picture shows Feature: 1. main technical performance indicators: curing time is not greater than 3000 bonding shear strength MPa>17.2 2. scope of application: This product is mainly used for bonding all kinds of dental orthodontic accessories. 3. methods of use: Tooth preparation: clean the enamel surface of the tooth, remove the dirt on the tooth surface, rinse thoroughly with water, isolate the teeth, and blow the tooth surface with oil free and moisture free air guns. Acid etching: apply the etching agent on the tooth surface, rinse thoroughly after 50-60 seconds, blow dry, and the tooth surface after etching is chalky. If no Cretaceous appears, the time of etching is prolonged. Base coat: brush a thin layer of liquid on the acid etching surface with a small brush. Brush a thin layer of liquid on the surface of the bracket with another small brush. Adhesion: apply a small amount of paste with the harmonic bar to the bonding surface of the bracket which has been coated with liquid, and form a thin layer. Glue the brackets to the teeth immediately after applying the paste. Position bracket in 20 seconds, micro pressure 5-10 seconds, prevent brackets slipping. After 40-60 seconds, remove the superfluous liquid and paste. After 5 minutes of curing, the orthodontic operation can be performed. Main structure and performance: This product is a kind of enamel adhesive resin with aromatic dimethacrylic acid resin as the main raw material. It has the advantages of convenient use, less waste and independent operation, and has high clinical bond strength. It is an ideal new generation of enamel adhesive resin. This product has liquid (primer) and paste (PAS TE) consists of additives, such as etching agent, mixing rod, small brush, etc. Package:1 * Dental adhesive SPU:ZKQ9121