1set Universal Car Alarm Remote Start Keyle Push Start System Remote Start/Stop Hand Brake Detection App Function For 12V Car Description Main functions: keyle entry, one click start/stop, remote start/stop, open ACC instrument panel, remote open trunk, remote search, remote unlock/close lock, silent mode, anti-theft release (emergency use), remote learning,Hand brake detection,Door alarm anti-theft,With identity recognition,Car door flashing light1. Intelligent induction switch lock (keyle entry)Operation: Leave the car with a remote control for more than 3 meters and lock the car, with the button light flashing once and the horn honking onceApproaching the car with a remote control for about 2 meters will automatically unlock the car. The horn will sound twice and the button light will flash twice.2. Keyle entry mode switching (PKE mode on and off)Off: In the disarmed state, pre and hold the lock button for 5 seconds, and the horn will sound twice to turn off the sensing function.Open: In the disarmed state, pre and hold the lock button for 5 seconds, and the horn will sound to indicate the activation of the sensing function.3. One click start/stop: Pre and hold the brake firmly, and briefly pre the start button to start or stop the car. (Note: After one click start, the button light remains on for a long time)4. Turn on the ACC instrument panel (turn on the audio instrument panel): Without preing the brake, briefly pre the button to turn on the audio and instrument lights. (The button light flashes when the audio is turned on without preing the brake)5. Remote start and remote shutdown operation (long pre remote start)Remote start operation: A leaves the car at least 5 meters away and locks the door, with the horn honking once.Pre and hold the car search button on the remote control for 5 seconds, and the instrument panel will be powered on for 6 seconds before starting.After succeful C startup, the car automatically locks the doors, and the horn sounds twice to indicate succeful startup.Attention: - Remote start of the host intelligent detection battery, no need to connect the oil pump cable, can only be started up to 4 times.-To operate remote start, first shift the gear to the neutral position (manual gear).-After succeful remote start, the car will run for 18 minutes at a fixed time, and the engine will turn off after 18 minutes.-If the foot brake cable is directly connected to a constant voltage of 12V, it cannot be remotely started. Please pay attention during installation.Remote control shutdown operation: If you want to remotely shutdown the vehicle within 18 minutes, you can also pre and hold the search button on the remote control for 5 seconds without releasing it. After the shutdown, the vehicle will automatically enter the anti-theft state. (Remote control shutdown is not allowed to approach the car, otherwise it will be ineffective. Even after stepping on the brake when getting on the car, remote control shutdown cannot be performed.)6. Manual switch lock operation (manual mode):Manual lock closing: Short pre the lock button on the remote control, the car will close and the button light will flash once, and the horn will sound once. (Note: Manual locking means standing outside the sensing distance, otherwise the doors will automatically open after locking.)Manual unlocking: Short pre the unlocking button on the remote control, and the car will unlock with the button light flashing twice and the horn honking twice.7. Remote control to open the trunk (trunk mode): Pre and hold the remote control unlock button for 5 seconds to open the car trunk.8. Remote car search operation (car search mode): Short pre the button in the middle of the remote control to perform a 15 second car search operation.9. Hand brake detection: Pull the hand brake to remotely start, safety upgrade10. Door alarm anti-theft function11. With identity recognition function12. Car door flashing light function13. Mute mode switching:Open: In the unlocked state, pre and hold the lock button and search button for about 5 seconds, and the horn will sound to enter silent mode.Off: In the unlocked state, pre and hold the lock button and search button for about 5 seconds, and the horn will sound twice to exit the mute mode.14. Anti theft release operation (emergency use)Operation: When the two remote controls of the car are lost or damaged, if you want to use the car, follow the following operation method. Use the spare key to open the door, and pre and hold the red switch for 5 seconds to start the car.15. Remote control learning operation instructions (remote control code matching)Operation: Pre and hold the red code check switch for 10 seconds, wait for the start button light to light up for a long time, and then briefly pre the remote control. You can continuously learn 4, and when the 5th one is learned, the first remote control will be squeezed out. Fit 12V CarRemote control and receiving frequency 433MHZ Pa