Feature: 1. Low Power Consumption and Noise: This submersible pump is with low noise so will be quiet running and low power consumption. 2500L/H and 50W. 2. Balanced Rotating Speed: Our submersible water pump is with reliable operation and with balanced rotating speed. 3. Wide Application: Submersible pump is used for all kinds of fish tank, pool, as the power device of water circulation. Suitable for miniature fountain, handicraft, bonsai fountain, aquarium. 4. Easy Disassembly and Maintenance: Longer service life of this submersible pump, easy disassembly and maintenance. 5. ABS Material: This water submersible pump is made of ABS material and with excellent workmanship. Wear resistance is great. Specification: Item Type: Side Suction Submersible Pump Model: EB 307 Material: ABS Power: 50W H- Maximum: Approx. 2.5m / 8.2ft Maximum Flowing: 2500L/H Water Depth: 100cm(39in) Diameter of Connection Port: Approx. 19mm / 0.75in, 22mm / 0.87in, 25mm / 0.98in. Package List: 1 x Submersible Pump3 x Adapter4 x Suction Cup Foot1 x Instruction Manual Note: A. Safety instructions1. The submersible pump should work within the voltage and frequency range marked on the submersible pump before working, please do not use voltage and frequency other than those specified.2. Do not work the submersible pump in flammable and corrosive liquids, only work in refreshing and sea water.3. The submersible pump must be safely immersed in water when working, not exposed to water, otherwise it will cause permanent damage to the submersible pump.4. Submersible pumps should preferably not work in water above 35°C or below freezing point, as this can cause damage to the pump.5. If the submersible pump outlet power is damaged, do not continue to use the pump to ensure safety.6. When the amphibious pump is used far from the water, the joint should be connected tightly and the air needs to be evacuated by water injection.B. Precautions for operation1. Cut off the power supply when performing maintenance on the submersible pump.2. Do not let the submersible pump idle or leave the water face for more than 5 minutes.3. Do not pull the power cord directly to lift the submersible pump, otherwise the power cord may be pulled out.4. Disconnect the power cord before removing the submersible pump from the water to ensure safety.The maximum diving depth is 1 m for submersible pumps.6. If an additional outlet is required, use a power cord with relative voltage and current ratings.