2pcs Single Operation Amplifier OPA892 with Low Distortion/Noise/200mA High Current

The bandwidth is 290MHz The slew rate is 700V/μ s The stabilization time is 30ns (0.1%), gain of 10VN OPAx892 remains stable at gains of 10 or higher and -9 or lower Description The bandwidth is 290MHz The slew rate is 700V/μ s The stabilization time is 30ns (0.1%), gain of 10VN OPAx892 remains stable at gains of 10 or higher and -9 or lower These amplifiers have a high driving capability of 200mA Each amplifier only consumes 7.5mA of power supply current OPAx892 has a total harmonic distortion (THD) of -68dBc at f=1MHz, designed specifically for applications that require low distortion Due to maintaining low distortion within a wide output voltage range OPAx892 is suitable for large dynamic range applications such as imaging, sonar, and audio Production materials The core operational amplifier is a genuine single operation OPA892 patch SOP8 package Surface mounted SOP8 package to direct insertion DIP8 package The direct insertion device will conduct high-precision AP testing on each chip to verify residual noise (usually in uV) and THD (usually in 0.00%), so you can buy with absolute confidence! Residual noise: uV Signal to noise ratio: 1 * *. 5dB Dynamic range: 1 * *. 9dB THD distortion: 0.0000 * *% THD+N distortion: 0.000 * * *% Intermodulation distortion: 0.000 * * *% Frequency response bandwidth: ± 0.050dB Color: As Shown Material: PC Package Contents: 2*single operation amplifier Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.