3 In 1 Rework Solder Station 863 Bga Soldering Stations Infrared Rework Station Hot Air Heat Gun Soldering Iron with Wind Nozzle 1. The preheater bga rework station adopts special air conduction and carbon brushless AC power supply to keep the airflow constant during cooling or preheating. 2. Digital setting and tic control are comfortable. 3. The platform is made of stainless steel, which can be used even if it is rusty. 4. Low-temperature preheating saves power, and low-temperature preheating will not damage components. 5. Due to the use of antistatic materials, it is safe for sensitive items. Hot air gun parameters: Rated voltage: AC 100~240V 50HZ Plug: American standard/European standard (optional) Maximum power consumption: 450W Type: brushless fan, soft wind Air flow: 120L/min (maximum) Temperature range: 100 degrees Celsius -500 degrees Celsius Handle installation length: 120CM Noise: 45db Soldering station parameters: Output voltage: 24V AC Maximum power consumption: 50W Temperature range: 100 degrees Celsius -500 degrees Celsius Ground potential: below 2mV Grounding impedance: 2 ohms or less Heating element: ceramic heating element Heater power: 50W Preheater parameters: Maximum power: 605W Heating type: far infrared heating plate Temperature range: 100 degrees Celsius -500 degrees Celsius Power *1 Host *1 Welding pen*1 Heater*1 Manual *1 Wind nozzle*7