Features:1. Comply with IEEE 802.11n standard IEEE 802.11g standard IEEE 802.11b standard.2. Support router client bridge relay AP mode.3.No external power adapter required.4. Provide a 10 / 100M adaptive Ethernet LAN port.5. QoS features to ensure good quality VoIP and multimedia data streams.6.Wireless broadband rate up to 300Mbpscompatible with 802.11b / g products traditional 1T1R 2T2R MIMOTM providing greater throughput range.7. Support SSID broadcast control support WMM and WMM-APSD.8. Support 64/128/152-bit WEP compatible with 128-bit WPA (TKIP / AES) MIC IV extension shared key authentication IEEE 802.11.Specification:1. AP mode. This is also the default operating mode of the device. The device in this mode is a wireless access point plug and play no configuration required.2. Router mode. The device in this mode is equivalent to a wireless router wired interface as a WAN wireless LAN. If you need to set the router mode multiple wireless clients can share broadband Internet access.3. Repeat mode. The function of the wireless relay device is used to realize the relay and amplification of the wireless signal and a new wireless coverage area is formed and finally the purpose of extending the wireless network coverage is achieved.4. Bridge mode. Using the bridging function of the device the new mini WiFi repeater first establishes a wireless connection with the front-end wireless network and then sends a wireless signal by itself to form a new wireless coverage area which can effectively solve the wireless problem coverage such as weak signal and signal blind spots.5. Client mode. Client mode also known as \"master-slave mode\". The AP working in this mode is the wireless client of the primary AP which is equivalent to the wireless network card. Anti-ARP attack supports IP and MAC address binding effective Prevent ARP attacks and protect intranet security.includes:1 x WiFi Repeater1 xRJ45 Cable1 xEnglish Manual"