30M 98ft Cat5e Network and Power Extension Cable for CCTV IP Camera Overview This 30M 98ft Cat5e extension cable carries both Ethernet signal and power to extend the reach of CCTV IP camera installations. It simplifies wiring by reducing the need for separate power runs and lets you position cameras where they are most effective. Key benefits Singlecable solution: Delivers network connection and power extension in one cable to reduce installation time and cable clutter. Extended reach: 30 meters 98 feet length provides flexibility to place cameras farther from routers, switches, or power sources without relocating equipment. Cat5e compatibility: Uses Cat5e standard to support common Ethernet networks and typical IP camera data requirements. Easy integration: Works with standard Ethernet devices used in CCTV setups, including IP cameras, network video recorders, and network switches. Installation convenience: Suitable for installations or retrofits, minimizing the need to run multiple separate cables. Functions and performance Provides a reliable path for LAN traffic and power to remote IP cameras, enabling consistent camera placement and simplified routing. Designed for electronic security system applications and typical CCTV network topologies that require combined network and power extension. Compatibility Compatible with most CCTV IP camera systems and standard Ethernet equipment used in security installations. Intended for use with typical camera power arrangements and network interfaces; verify device power and connection requirements before installation. Typical applications Residential security: Extend an outdoor IP camera to a driveway or backyard location where the router or power source is distant. Commercial and small business: Connect parking lot or perimeter cameras to an existing network and centralized power source without running separate power cables. System upgrades or repairs: or extend existing camera cabling to relocate cameras or connect additional units without major rewiring. Installation notes Confirm camera power needs and connector compatibility prior to use. Route the cable to avoid sharp bends and excessive tension for long term performance. Use appropriate weatherproofing or conduit when routing cable outdoors or through exposed areas. This Cat5e 30M 98ft network and power extension cable provides a practical, straightforward way to extend CCTV IP camera placements while keeping installations cleaner and more flexible.