Features 1、Adjustable Atomizing Nozzle: The direction can be adjusted 360 degrees. saving you time and ensuring they get the right amount of water. 2、Easy Installation: Connect the timer to your water tap with the included adapter and attach the sprinkler to your garden, no complicated setup required. 3、Automatic Power Saving: When there is no operation within 15 seconds, the timer will enter the screen state, and the automatic watering function of the timer will run normally under the screen state. 4、Equipped with G1/2 Adapter: The G3/4 threaded base of the controller itself is also equipped with G1/2 adapter for easy connection of the two threaded calibers. 5、Temporary Manual Watering: This feature allows you to water manually without interrupting your set timer schedule. When the set watering time ends, the timer will automatically stop watering. Specifications Item Type: Misting Plant Watering System Working Temperature: 1-60℃ Water Tap Connection: 3/4in internal thread (equipped with G1/2 adapter) Outlet: 3/4in external thread Battery (Not Included): 3 x 1.5V AA alkaline battery Controller Size: 145 x 93 x 93mm/5.71 x 3.66 x 3.66in Mounting Hole Distance: 100mm/3.9in Sprinkler Diameter: Approximately 60m/196.9ft Water Flow Rate: Approximately 0-8L/h Pipe Specifications: 8/12 Pipe Length: 10m/32.8ft Suitable for: Agriculture, Lawn, Garden, Courtyard, Greenhouse Purpose: Cooling, Watering, Landscaping Weight: Approx. 1739.00g / 61.34oz Material: PVC, plastic Troubleshooting: After the battery is installed, the LCD screen does not display anything. Check the Controller: The battery is not properly placed according to the positive and negative electrode markers. The LCD screen enters the sleep state. The water didn't come out at the scheduled time. Check the Controller Program: The current time setting is incorrect. The irrigation start time is not set accurately. You are making a time plan right now. The device is in OFF mode. The battery is exhausted, please replace it with a new one. Filter clogged with dirt, clean or replace if necessary. The tap is off. Hose faucet connection, outlet leakage. Check the Faucet: Filter installed correctly. Hose faucet connection, outlet, pipe damaged. The thread of the water pipe is consistent with the thread of the equipment, if necessary, use the appropriate O ring, quick connector or PTFE tape. Package List 1 x Irrigation Controller with G1/2 Adapter 1 x Washer 1 x G3/4 to 9/12 Adapter 1 x User Manual 1 x 10m 9/12 Tube 1 x End Cap 10 x 9/12 Tee Misting Nozzle Assembly