Welcome to Global electronics wholesale We provide low price & high quality and best service. 100% Customer satisfaction is our goal Please note that we are Wholesale products. If you need products in large quantities, Please contact us, to negotiate! Cooperation Happy!! Technical parameters Working temperature -50~250 Terminal contact 3EA (applied 3 wire: A,B, B, ) Material Lead wire Four fluorine sheath high-temperature wire silver plated Protection tube(probe part) Stainle steel 304 Size Lead wire 30cm Protection tube(probe part) Long 30mm Diameter 3mm Nominal Resistance R0 Tolerance DIN EN 60751 1996-07 Tolerance DIN EN 60751 2009-05 100 Ohm at 0 Cla C F 0.1 Cla A F 0.15 Cla B F 0.3 Cla D F 0.5 1000 Ohm at 0 Cla C F 0.1 Cla A F 0.15 Cla B F 0.3 Cla D F 0.5 Sensor chip technology parameters The measuring point for the nominal resistance is defined at 8mm from the end of the sensor body. Temperature range: -70 to +500 (continuous operation)(temporary use to 550poible) Tolerance Cla B/D: -70 to +500 Tolerance Cla A: -50 to +300 Tolerance Cla C: 0 to +150 Temperature coefficient: TC = 3850 ppm/K Vibration resistance: At least 40g acceleration at 10 to 2000 Hz, depends on installation Shock resistance: At least 100g acceleration with 8ms half sine wave, depends on installation Environmental conditions: Unhoused for dry environments only Insulation resistance: 100 M at 20; 2 M at 500 Self heating : 0.6 K/mW at 0 Response time : Water current (v= 0.4m/s): t0.5 = 0.04s t0.9 = 0.12s Air stream (v= 2m/s): t0.5 = 2.2s t0.9 = 7.0s Measuring current : 100: 0.3 to 1.0 mA 1000: 0.1 to 0.3 mA (self heating has to be considered)