360° Motion Sensor Light Switch with Smart Daylight Detection and Adjustable Delay for Indoor Lighting

Infrared motion sensor with automatic daylight detection and adjustable delay for lighting control Key benefits Automatic activation only in low light: the builtin infrared sensor monitors ambient light between 3 and 2000 and enables the sensor to operate only when lighting conditions are low. Daylight sensing prevents activation during daytime. run time: continuous delay adjustment lets you set the activation period from approximately 10 seconds up to 7 minutes to match occupancy patterns and space use. Full area coverage: 360 degree detection provides consistent monitoring across the entire coverage area for reliable switching when motion is present. Sensitive motion detection: recognizes movement at speeds from 0.6 to 1.5 m/s for dependable response to walking occupants. Supports common lighting types: rated for up to 800 W tungsten lighting or 300 W fluorescent lighting, making it compatible with many residential and commercial fixtures. How it solves problems Eliminates the need for manual switching in frequently used areas by turning lights on only when motion and low ambient light are detected. Reduces unnecessary activations during daylight hours by using its daylight sensing function. Adapts to different spaces with a continuous delay control so lights stay on only as long as required. Typical applications Hallways and stairwells: automatic, full coverage detection ensures lights come on for passing occupants and can be tuned for short or extended delays. Utility rooms and storage areas: compatible with standard tungsten and fluorescent fixtures and provides hands lighting when someone enters. Office corridors and restrooms: prevents daytime activation while ensuring lighting is available during low light conditions and lowtraffic periods. Specifications Sensor type: infrared Ambient light detection range: between 3 and 2000 Detection angle: 360 degrees Motion speed detection: 0.6 to 1.5 m/s Delay time: approximately 10 seconds to 7 minutes, continuous adjustment Load capacity: up to 800 W for tungsten lighting, up to 300 W for fluorescent fixtures Installation and compatibility notes Designed to integrate with standard lighting circuits and common tungsten and fluorescent fixtures. Check fixture ratings to confirm compatibility with the specified load limits.