Feature:1. LARGE PRINT SIZE: The maximum print size of this FDM printer is 300x300x400mm, bringing you the maximum possibility of all different size models2. QUICK ASSEMBLY: 6 screws can complete the installation of the printer frame, which is convenient and quick to assemble3. EASY WIRING: Auto leveling FDM printer use CAT7 cable to transmit data, plug in two cables to complete the wiring4. CONTROL BOX SKYLIGHT DESIGN: Easy to check the running status of the main board, convenient to replace the stepper drive5. VARIOUS PRINTING MATERIAL: Auto leveling 3D printer support printing materials contain PLA, ABS, PETG, wood consumablesSpecification:Item Type: 3D PrinterModel: For Bluer PlusPlatform Size: Approx. 300 x 300 x 400mm / 11.81 x 11.81 x 15.75inPrinting Accuracy: 0.1-0.2mmLayer Thickness: 0.1-0.4mmPrinting Method: Storage card or online printingPrinting Speed: 20-200mm/sExtrusion Head Temperature: 260 MaximumHeated Bed Temperature: 100 MaximumPrinting Material: PLA, ABS, PETG, wood consumablesDiameter of Consumables: Approx. 1.75mm / 0.07inSoftware Format: STL, OBJ, JPGPrint File Format: GcodePower Supply: EU Plug 100-240VLanguage: English, French, Spanish, German, Korean, Russian.Package List:1 x 3D Printer Set1 x Power Adapter1 x Extruder Module1 x User Manual1 x Installation KitNote:Machine Error Code: Err1: The incubator exceeds the maximum temperature limit, please check whether the thermistor is short circuited;Err2: The print head exceeds the maximum temperature limit, please check whether the thermistor is short circuited;Err3: The incubator exceeds the minimum temperature limit, please check whether the thermistor is disconnected;Err4: The print head exceeds the minimum temperature limit, please check whether the thermistor is disconnected;Err5: Print head heating failed. If the print head does not reach the set temperature difference within the set time, an error will be reported; please check the configuration file settings or check whether the power supply is sufficient;Err6: Incubator heating failed. If the hotbed does not reach the corresponding temperature within the set time, an error will be reported; please check the configuration file settings or check whether the power supply is sufficient;Err7: Thermal runaway; when the temperature rises to the target temperature, if the current temperature fluctuates greatly within the set time, an error will be reported; please check whether the thermistor is normal or the PID value is appropriate.