3KM Long Range DC 12V 2CH RF Wireless Remote Control Switch System Transmitter Receiver

Product Information Features: 1. Advantages: High privacy, stable performance, and low power consumption. 2. High sensitivity: The wireless RF signal can penetrate walls, floors, doors, and windows. 3. Very convenient: You can turn the receiver (remote control) on/off with the transmitter from anywhere within a reliable distance. 4. The remote control's range is 0 to 3000 meters, the ideal distance without signal blockage and interference. With signal blockage and interference, the range may increase by approximately 10% to 90%. 5. Application: Control lights, TVs, motors, fans, cameras, video signals, audio signals, and electrically operated doors/locks/windows, etc. Specifications: Features: 100% brand new and high-quality wireless control. Advantages: High privacy, stable performance, and low power consumption. High sensitivity: The wireless RF signal can penetrate walls, floors, doors, and windows. The remote control's range is 0 to 3000 meters, the ideal distance without any signal or blockage interference. It will increase and decrease by approximately 10% to 90% with signal or blockage interference. Very convenient: You can turn the receiver (remote control) on/off with the transmitter from anywhere within a reliable distance. Easy to use: Wireless control, easy to install; directly replace your old or broken one. Applications: Control lights, TVs, motors, fans, cameras, video signals, audio signals, electric doors/locks/windows, etc. Specification: Material: ABS Color: Black (Receiver) + Gray (Transmitter) Remote Control Battery: 2 AA batteries (not included) Channel: 2 CH Remote Control Distance: 0-3000m (Ideal distance without any blocking or signal interference. It will increase and decrease by approximately 10% to 90% with blocking and signal interference.) Encoding: Fixed code, solder Frequency: 433MHz Decoding: Fixed code, solder Power Supply (Operating Voltage): DC 12V (3V/6V/9V/24V can be customized) Static Operating Current: ≤10mA Operating Temperature: -40℃ ~ +80℃ Receiving Sensitivity: ≥-95dB Output Current: ≤10A Operating Mode: Hat hopping, jogging, self-locking. Locking (adjustable) Output mode: Contact output (AC and DC can be controlled) Connect to a 12V DC direct output Receiver: 8 * 3.5 * 2 cm / 3.1 * 1.4 * 0.8 inches Remote control: 15 * 4 * 2.5 cm / 5.9 * 1.6 * 1.0 inches Package weight: 92 g Modes: 1. Toggle/self-lock: Press -> On; Press again -> Off - Press a button once to turn on. Press the same button again to turn off. (1 channel switch (receiver) requires a 1-button remote (transmitter). 2. Interlock: Press -> On; Press another button -> Off - Press one button to turn on/on. Press another button to turn off/off. (1 channel switch (receiver) requires a 2-button remote (transmitter). 3. Momentary/Jog: Press and hold -> On; Release -> Off - Continue pressing a button to turn on/on. Release your finger to turn off/stop. (1 channel switch (receiver) requires a 1-button remote (transmitter)). (The original setting is momentary; change it yourself.) Learning and deleting the code: 1. Learning: Press the learning code. The indicator will turn on/off. Release your finger. Press any button on the remote. The indicator will flash twice and then turn off. This means you Learn it correctly. 2. Remove: Press the learn button for approximately 8 seconds. The indicator light will turn on and off. This means the code has been successfully removed. Instructions: Jog Learning: Press the learn button on the control panel once. The LED will flash once and then turn off. Then press the button on the remote control that needs to be coded. The LED on the control panel will flash several times in succession, indicating that the code has been successfully coded. Self-locking Learning: Press the learn button on the control panel twice. The LED will flash twice and then turn off. Then press the button on the remote control that needs to be coded. The LED on the control panel will flash several times continuously, indicating that the code has been successfully locked. Learning: Press the learn button on the control panel three times. The LED will flash three times and then turn off. Then press the A and B buttons on the remote control that need to be coded. The LED on the control board will... The LED flashes several times continuously, indicating that the code has been successfully entered. 5-second delay: Press the learn button on the control panel 4 times. At this point, the LED will flash 4 times and then turn off. Then press the button on remote control A that needs to be coded. The LED on the control panel will flash several times continuously, indicating that the code has been successfully entered. 10-second delay: Press the learn button on the control panel 5 times. The LED will flash 5 times and then turn off. Then press button A on the remote control that needs to be coded. The LED on the control panel will flash several times continuously, indicating that the code has been successfully enter