If you want to make your wireless communication system with low cost, this wireless transceiver module is a suitable choice. It provides a good balance between wireless transmission performance and cost. You can easily integrate it with your own MCU/ARM/PIC/AVR/STM32 system. This NRF24L01+ module is designed with a power amplifier and SMA antenna, enabling wireless communication of up to 800+ meters in line of sight conditions without barriers. A host microcontroller can communicate and configure the nRF24L01+ through a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible via the SPI connection. Configurable parameters include channel frequency (125 selectable channels), output power, and data rate (250kbps, 1Mbps, and 2Mbps). The on-chip voltage regulator accepts supply voltages from 1.9 to 3.6V. The module has 5V tolerant inputs that allow direct connection of SPI pins to compatible controllers, including those used with Arduino. Internal filtering helps meet RF regulatory standards. The module uses Gauss Frequency-Shift Keying (GFSK) modulation and features fast Automatic Gain Control (AGC). It includes an Interrupt Request pin that can wake the host microcontroller from sleep mode when a transmission is received, providing energy savings for battery-powered devices. Range: 800+ meters line of sight Frequency: 2.4GHz ~ 2.5GHz Working Voltage: 3–3.6V Max Max Current: 115mA Multi-frequency: 125 channels Color: Black Material: PCB, plastic, metal Package Contents: 4 × Wireless Module 4 × Antenna 4 × NRF24L01 Wireless Module Breakout Adapter Only the above package content is included; other products are not included. Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error allowance is +/- 1–3 cm.