Features 14-channel wireless remote control replicator, 4-button design. 98.4328.1ft transmission distance, low interference. 2 Advanced IC programming procedures to avoid accidentally deleting codes. Clone up to 2 remote control signals from 2 remote controls. 3433mhz fixed frequency remote control cloner replicates 99.99% of commonly used learning and fixed code remote controls. 4 Suitable for cars, roofs, garages, gates, gates, alarm systems, heating systems, home automation, etc. 5 Made of high-quality ABS and metal, sturdy, wear-resistant and durable. Lightweight and portable, easy to store and carry. Product type: Garage remote control Material: Metal + ABS Battery type: Button battery (included) Battery capacity: 120mAh Battery model: CR2025 Color: Black Working voltage: DC6V Rated current: 0.5mA Working frequency: 433MHz Buttons: 4 buttons ( A B C D) Code Pairing Format: Face to Face (One to One) Modulation System: AsK (AM) Transmit Power: +13dbm Wind Frequency: 0.2MHz Transmission Distance: About 30m-100m/98.4-328.1ft 1. Chips can be copied 2260 (all manufacturers); 2262 (all manufacturers); PT2264, 5326 (all manufacturers); SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918 series, 527 manufacturers (2715all) all manufacturers ); HCS101, HCS200/HCS201 (part code), HCS300/HCS301, MCU parts...2. How to clean up the code: Press the unlock button and the lock button at the same time (in some cases the button and button are underneath). After the LED flashes 3 times, release any button while holding the other button, and then press the release button 3 times. Enter flash state. At this time, all memory data has been cleared, and no matter you press the button, the LED light of the cleaning remote control will not light up3. To copy, hold the original remote control in one hand and the copied remote control in the other hand. The two remote controls should be as close as possible (it is best to place the two remote controls 0 distance away from each other on the table). Press the copy button respectively. When the LED indicator light flashes three times and then flashes quickly, the copy is successful. The other button operations are the same. Some remote controls have low transmit power, and the original remote control must be placed back on the duplicate remote control to operate. To avoid the presence of noise, interference should be avoided during operation. Packing list 1 x Garage remote control"