Features & Specifications: new and high quality, good operation. For GPS Navigation Touch Screen Digitizer or MFD. Size: 7.3in. Thickness: 1.8mm. Length of FPC (flexible print circuit): 34mm. Working voltage: 5V. Interface: 4-pin. Special feature: Support Can-Bus. material: Glass. Type: Resistive touch screen. Color: transparent Compatible with: For IS250 IS300, IS350, IS-F 2006-2009 For GS300 GS350, GS430, GS450h 1999-2009 For RX300 RX330, RX350, RX400h 2004-2009 For Prius 2004-2009 And some other models that use the 4-pin/wire touchscreen. Attention: Installation instructions not included. Tool not included. It is only panel, not including a LCD display. Please check the exact dimensions of the touch screen before buying to make sure that it is fit for your device. If there is any question/problem, please to contact us. There is a layer of protective film on each of the panel. Please remove the protective film before using it. There is a layer of polarizer film on the front of the panel (Under the protective film). If it is blurry after installation, please remove the polarizer film. If it is clear, please don't remove it. As shown in the last picture. Package Contents: 1x Touch Screen Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.