Feature: 1. AUTOMATIC BALANCING: Adopt intelligent MCU chip main control, can realize automatic self balancing work, and amorphous isolated fully symmetrical transformer. 2. HIGH EFFICIENCY: Ultra low internal resistance MOS device constitutes an ultra low dynamic impedance inverter circuit to achieve high power equalization work. 3. VOLTAGE DETECTION: Automatically detect the lowest voltage of the battery, stop working when the battery is low in energy, and protect the battery from power loss. 4. MULTIPLE FUNCTION: With input overcurrent fuse resistor to ensure safe operation, automatic and manual trigger dual modes and manual forced equalization timing off function. 5. GOOD COOLING: Inverter heat dissipation design under extreme equilibrium of high pressure difference, and made of aluminum alloy material, has good corrosion resistance. Specification: Item Type: Battery Active Equalizer Material: Aluminum Alloy Applicable Battery Type: For ternary lithium, lithium iron phosphate battery Applicable Battery Strings: 4-13S Minimum Balance Voltage: 15mV Maximum Equalizing Current: 5A Forced Equalizing Timing: 60 minutes Cable Interface: 3.81 Interface Low Voltage Automatic Shutdown: 2.7V (2.5V)/string Balance Method: Parallel energy transfer method Standby Load Power Consumption: 50mΩ) will affect the equalization effect.3. Be sure to rewire when using the equalizer, and the cross sectional area of the wire must be ≥0.5mm², otherwise the equalizing current will be affected.4. If the battery unit is damaged or aging, the purpose of balancing cannot be achieved.5. The balancing current and time are affected by factors such as battery capacity, battery internal resistance, and cable resistance.