LCD Display Device for 5/5.5 Inches Size. This display is compatible only with 36V 12A controller or JIPIN controller. Please confirm the controller model before purchasing. Incompatible controller models may result in throttle malfunction. Display wiring instructions (match according to wire color during installation): Red: + (power supply voltage) Black: - White: Controller switch control line Blue: RXD signal line Yellow: TXD signal line Green: Acceleration signal line NOTE: Instrument settings for 24V/36V voltage: Press and hold the middle button for 3 seconds to switch modes. Use the up and down buttons individually to increase or decrease gears. Press both up and down buttons simultaneously to enter the setting interface. Press the middle button to cycle through settings. Adjust parameters using the up and down buttons. Press both up and down buttons together to save settings after adjustment. Material: Plastic Color: Black The product features a 6-pin connector and is designed exclusively for 6-pin interfaces. Please verify compatibility before ordering. Package Contents: 1 x Scooter Display Note: The package includes only the items listed above. Other accessories are not included. Note: Lighting effects and screen differences may cause slight variations between the actual product color and the images shown. Measurement error allowed is +/- 1-3 cm.