60A 10 55V DC Brush Motor Speed Controller Digital LCD Slow Run Stop Timer Reversible

Feature: 1. Backlight LCD screen displays working time, 0 100percent speed percentage, current mode and forward reverse status. 2. Multiple limit modes are optional, can set the slow start and stop time. 3. Can set upper limit and lower limit of the speed. 4. Can set the total working time, the motor stops when the time is up. 5. Support independent speed regulation of forward speed and reverse speed. 6. Manual and automatic modes optional, the motor automatically rotate forward reverse within the set time under automatic mode. 7. Touch switch to switch forward and reverse status, jog acceleration and deceleration, solve the problem that the traditional potentiometer is easily damaged. Specification: Item Type: DC Motor Speed Controller Input Voltage: DC10 55V (the specific voltage must be equal to the rated voltage of the motor) Output Voltage: Linear under load Instantaneous Current: 60A Continuous Current: less than 40A Speed Regulation Type: Current Regulation Speed Adjustment Method: Jog + Timing: Yes Limit Function: Yes Slow Run Slow Stop: Can be set Speed Digital Display: 0 100 percentage Speed Range: 0 100percent Control Frequency: 15KHZ Connection Type: Fence type terminal Support Motor: Brush Motor Module Size: 148x95x36mm 5.83x3.74x1.42in Mounting Size: 142x88mm 5.59x3.46in Installation Method: Embedded Function: 0 1 2 3 4 5 6 7 8 9 function settings are as follows: Manual Automatic Mode Selection Function 0: 1 is manual mode, 2 is automatic mode, default is manual mode. Slow Run Time Setting Function 1: 000 100, slow start to 100percent speed, adjustable time 0 10s, default is 1s. Slow Run Time Setting Function 2: 000 100, slow stop, adjustable time 0 10s, default is 1s. Speed Lower Limit Setting Function 3: 000 080, adjustable minimum speed 0 80percent and less than the maximum speed setting value, default is 0. Speed Upper Limit Setting Function 4: 000 100, adjustable maximum speed 0 100percent and greater than the minimum speed setting value, default is 100percent . Acceleration Deceleration Value Setting Function 5: 001 002 005 010 015 020 025, each time the key increase reduce is pressed, the speed changes by 1percent , 2percent , 5percent , 10percent , 15percent , 20percent , 25percent . Motor Running Time Setting Function 6: 1s to 99h 59min 59s, default is 99h 59min 59s. The following functions 7 8 9 are time setting in automatic mode Forward Rotation Time Setting Function 7: 0s 99h, default is 10s Stop Time Setting Function 8: 0s 99h, default is 10s Reverse Rotation Time Setting Function 9: 0s 99h, default is 10s Limit Mode Selection Function E: E1: No limit, default is no limit E2: After pressing start, the motor rotates forward to the forward limit and stops. After pressing start again, the motor rotated reverse E3: After pressing start, the motor rotates forward to the forward limit, and then rotates reverse to the reverse limit, finally motor stops E4: After pressing start, the motor rotates forward to the forward limit, and then rotates reverse, cycle working. Package List: 1 x Motor Speed Controller Note: The input positive pole and negative pole must be connected correctly. The input voltage(10V 55V) must be equal to the rated voltage of the motor.