60MHz 2 Channel DDS Arbitrary Waveform Function Pulse Signal Generator Frequency Meter JDS6600

Frequency: Sine frequency range: 0 to 60 MHz Square frequency range: 0 to 25 MHz Triangular frequency range: 0 to 25 MHz Pulse frequency range: 0 ~ 6 MHz TTL digital frequency range: 0 ~ 6 MHz Arbitrary wave frequency range: 0 ~ 6 MHz Square rise time: 1010ns Pulse width adjustment range: 25nS-4000 S Frequency accuracy: 20-20 ppm Frequency stability: ± 1 ppm / 3 h Vertical waveform resolution: 14 bits Waveform sampling frequency: 266 MSa / s Wavelength length: 2048 points Harmonic sinusoidal suppression: >=45dBc (Total sine harmonic distortion: Square and pulse overshoot (square): Square sum pulse period range (pulse): 0.1-99.9% Ramp linear wave: 98 98% (0.01Hz 10 10 kHz) Output: Amplitude: frequency Amplitude resolution: 1 mV Amplitude stability: ± 0.5% / 5 hours Amplitude flatness: ± 5% ( 10 MHz) Waveform: Output impedance: 50Ω1010% (typical value) Protection: 60 S short circuit will not be damaged Direct Current offset: Offset adjustment range: output amplitude> 2 V, -9.99 V ~ 9.99 V; 0.2V Resolution offset: 0.01 V Specification Phase Faction: Phase adjustment range: 0 35359.9o Resolution stage: 0.1 TTL / outbound communication: Low level: High level: 1-10 V Rise / fall time: 2020 NS External measurement function: Frequency meter function-Frequency measurement range: 1Hz ~ 100 MHz Frequency meter function-measurement accuracy: gate time continuously adjustable between 0.01 S to 10 s Counter function-counting area: 0-4294967295 Coupling counter function mode: 2 coupling modes, Direct Current and AC Counter function-counting mode: manual operation. Input signal voltage range: 2-20 Vpp Pulse width measurement: 0.01us (resolution), 20 s (maximum measurement time) Period measurement: 0.01us (resolution), 20 s (maximum measurement time)