Item Type: LED Power Supply_x000D_ Modulation Method: Pulse width modulation (PWM) type. _x000D_ Transistor Connection Mode: Single Ended_x000D_ Input Voltage: AC170-265 (V)_x000D_ Working Frequency: 50/60 (Hz)_x000D_ Output Power: 60 (W)_x000D_ Work Efficiency: 85 (%)_x000D_ Output Ripple Noise: 50-60_x000D_ Output Voltage Accuracy: 99 (%)_x000D_ Voltage Adjustment Rate: 5 (%)_x000D_ Load Adjustment Rate: 5 (%)_x000D_ Product Certification: ce_x000D_ Working Temperature: -45~+80_x000D_ Installation Method: Wire Connection_x000D_ Protection Level: IP67_x000D_ Cooling Fan Type: Self Cooling Type_x000D_ _x000D_ _x000D_ Note: _x000D_ 1. Choose the right power to increase the power supply service life. Please choose a model with 30% more output power rating than the electrical appliance. For example, please use 100W power supply on 80W electrical appliances. _x000D_ 2. Consider the load characteristics. If the load is a motor, a light bulb or a capacitive load, and the current is large at the moment of power on, a suitable power supply should be selected to avoid overload. If the load is a motor, consider the voltage reverse when shutting down. _x000D_ 3. In addition, the working environment temperature of the power supply needs to be considered, and whether there is additional auxiliary heat dissipation equipment, and the output of the power supply with excessively high ambient temperature needs to be derated. _x000D_ 4. Due to the high efficiency of the switching power supply, which can generally get to more than 80%, in the selection of its output current, the maximum absorption current of the electrical equipment should be accurately measured or calculated. _x000D_ 5. Before turning on the power, check whether the input and output leads are connected correctly to avoid damaging the user's equipment. _x000D_ 6. Check whether the installation is firm, whether the mounting screws are in contact with the power supply board components, and measure the insulation resistance between the casing and the input and output to avoid electric shock. _x000D_ 7. To ensure the safety of use and reduce interference, please ensure that the grounding terminal is reliably grounded. _x000D_ 8. Multi output power supplies are generally divided into main output and auxiliary output. The main output characteristic is better than the auxiliary output. In general, the main output has large output current. In order to ensure the output load adjustment rate and output dynamics and other indicators, it is generally required that each channel carry at least 10% load. _x000D_ 9. Please Note: Frequent switching of the power supply, the working environment and the load range will affect its life. You can choose a model with 30% more output power rating. _x000D_ 10. The power supply must not be installed in an environment with flammable materials and easy to catch fire (such as wood products, plastics, cardboard and other easy to burn materials) to prevent fire.