Condition: 100% brand newItem type: Electronic HandwheelMaterial: plasticColor: As picture shownHandwheel dameter: Approx. 65mm/2.6inWeight: Approx. 137g EncoderPower supply voltage: DC510%Pulse number: 100PPR(VH) output voltage (maximum): 3.8V(VL) output voltage (minimum): 0.3VOutput current: 80mAModel format: A.B.A-.B-Output resistance: DIFFReaction speed: 5KHzCurrent consumption 50mAStarting torques (maximum): 150gAxial volume (minimum): R 2kg10%Rotation life (minimum) :1KKROperation temperature: 0/+50Storage temperature -10/+70Operation humidity: 35-80%Vibration resistance: 0.5GHeavy strike resistance: 2GWiring tableOutput Signal: A B V0 VA- B-Terminal-Line Driver A: 1 2 3 4 5 6YP600-100B-1L represents a large handwheel with a diameter of 65mm, the output is 100 pulses, the working voltage is 5V, and the output mode is long-line output. This product is suitable for CNC machine tools, two orthogonal output signals (A, B), 100 pulses , The output mode is long-line drive.1High?grade CNC handwheel. 2High?quality components, strong product durability. 3Voltage 5V 100PPR A A? B B?. 4Professional manufacturing, stable performance and high reliability. 5Suitable for CNC machine tools, two orthogonal output signals (A, B), 100 pulses, long&8209;line drive output.1. The encoder is a precision instrument. It is forbidden to knock, drop, crash, etc. during installation. Improper installation or use will affect the performance and service life of the encoder.2. Pay attention to the shaft load of the encoder during installation, and must not exceed the limit load.3. Be careful not to exceed the limit speed of the encoder during use. If the speed exceeds the limit, the electrical signal of the encoder may be lost.4. The wiring must be correct. If the wiring is wrong, the internal circuit of the encoder will be damaged. Insulate the unused cables before the first start.5. The maximum response frequency is limited by the maximum speed.1 x Electronic Handwheel