Adapter Card IDE to SATA Two Way 1.5Gbps Durable Hard Disk Conversion Card for Desktop Computer

Feature: 1. SATA1: SATA motherboard, IDE device. The IDE hard disk is used on the SATA motherboard. Connect the SATA cable to the SATA1 interface, and insert the IDE port of the converter into the hard disk IDE. Before use, please set the IDE device jumper to MASTER. 2. SATA2: IDE motherboard, SATA device. The SATA hard disk is used on the IDE motherboard, the SATA data cable is connected to SATA2, and the converter's IDE is plugged into the motherboard IDE. 3. System Utilization Increased: IDE interface devices (such as hard disks, optical drives, etc.) are converted to SATA interfaces, or SATA interface devices are converted to IDE interfaces, which can be connected to the SATA interface on the motherboard to improve the utilization of system resources. 4. Support: The adapter card supports DVD, DVD‑RAM, MO, CD‑ROM, CD‑RW, SATA 100/133 hard disk, ATA 100/133 hard disk. 5. Compatible Standards: The adapter card is compatible with SATA 1.0 standard and ATA 1.0 standard, and the transfer rate is 1.5Gbps. Specification: Item Type: Adapter Card Material: PCB Color: Red How to Use: Instructions for use:1. The motherboard SATA hard disk that supports IDE2. Be sure to turn off the power of the host before operation3. Open the computer case and insert the IDE socket of the adapter card into the IDE socket of the computer motherboard (the motherboard of the IDE interface)4. Connect one end of the equipped SATA data cable to the SATA2 socket of the adapter card and one end to the SATA interface of the SATA device, and set the hard disk switch and jumper5. Connect the large end with the power cord to the spare power cord of the chassis power supply, and the small end to the power socket pins of the riser card (the white socket has 4 pins, be careful not to reverse the direction). Plug in the power cord of the SATA device at the same time6. After the connection is complete, the computer will boot into the BIOS for device detection. The host should be able to correctly identify the connected SATA device and start normal use. Note: When using the motherboard's IDE interface, first connect the SATA data cable and power cable to the card, and then connect the card to the motherboard's IDE port. When inserting, prevent the card from shaking back and forth, and don't damage the interface Package List: 1 xAdapter Card Note: Note: The compatibility of optical drives is worse than that of hard drives