Specs:1. Brand new material with high quality;2. 100% tested before shipment;3. Easy to configure. How to setup: A. Register the remote control:1. Make sure you have installed 2 AA batteries correctly;2. Connect the USB receiver to the USB port of the TV, place the remote control as close to the USB interface as possible. A connection picture appears on the TV screen;3. Press the wheel (OK) in about 3 seconds, the remote control LED will . 4. Put the remote control into the USB receiver, the LED will blink 3 times then turn off, the registration is complete, a pointer appears on the screen; When registration is complete, KYES direction (Up / Down / Left / Right), scroll up, scroll down, wheel (OK), p. The settings, the pointer are RF, but other keys still hold to use IR;With some of the TV models, if there is no response when connected to a USB port, please try another USB port. B. From pointer:If you press the keys (Up / Down / Left / Right) while the pointer is in use, the pointer will disappear from the screen. To show the pointer on the screen again, press the pointer key. You can move the remote control slightly to the right or left to control the direction. C. Deregister the remote control: Hold down the BACK HOME keys and at the same time for about 5 seconds to disconnect the remote control from your TV. The LED will blink 3 times and then turn off. The remote control will operate as a general IR remote control. Compatible for the following models: for UnN-MR600G for AN-MR600 / AKB74495301 for AN-MR600 / AKB74855401 for AN-MR650 for AN-MR650A for AN-MR700 for AN-SP700 for AN-MR500G for AN-MR500 for AN-MR400G for MBM63935953 for F8580 UF8500 UF9500 UF7702 for OLED screen 5EG9100 55EG9200 colour: black Material: plastic Package Conten: 1*Remote Control(without battery) Attention: This remote control without microphone for voice control. It can be used for most LG smart TV, maybe some functions do not match. Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.