Features:Easy to operate, one person can finish brake fluid replacing work.Without dirty oil stained on the floor.Abandoning the traditional tiring and boring oil replacing method.Universally works for cars, trucks and engineering vehicle. Say goodbye to the job of two personsSay goodbye to dirty oil stained on floorSay goodbye to the traditional tiring and boring oil replacement methodNotice:Actual color may be slightly different from the image due to different monitor and light effectPlease allow 1-3cm deviation due to manual measurementSpecification:Material:PlasticSize:15x5.5x24.5cmTube length:84cmHow to use:1.Take away the dirty brake fluid from the tank;2.Put in the new fluid back;3.Start the car and connect the hose between the equipment and the brake branch pump;4.Twist the screw to be loose,but not completely.Then open valve to start siphoning the fluid out.Please turn off the valve after screwing when it finish.5.Our tool fit for universal cars,you can use the tapered spout which is offered in the package avoid air leaking;6.Please lift the tool over the brake pump to ensure it work properly.Package List:1x Car Brake Fluid Oil Change Replacement Tool