Automatic Toothpaste Squeezer for Children Cute Cartoon Punch Free Wall Mount Home Accessory

[DETAIL]<br>Toothpaste Holder User Guide and Common Problem Solutions Manual<br>I. Preparation for First Use<br>When using the toothpaste tube for the first time, you need to squeeze the tube body to expel the air inside first, and then install it on the toothpaste holder to ensure smooth squeezing later.<br>II. Installation Steps of the Toothpaste Holder (Taking the Adhesive-back Model as an Example)<br>1. Clean the Surface: Select a smooth and seamless installation location such as glass, tiles, or painted doors. Wipe the surface clean with a clean cloth to remove dust and oil stains.<br>2. Peel off the Film and Paste: Peel off the adhesive-back protective film. Wipe the installation surface again until there are no water droplets remaining. Align the adhesive-back with the target position and paste it on.<br>3. Press and Exhaust Air: Press the adhesive-back area evenly with your hands to completely expel the air inside. Keep static pressure for 30 seconds to enhance the adhesion.<br>4. Let it Stand: After pasting, do not hang the toothpaste holder immediately. Wait for more than 12 hours until the adhesive-back is fully fixed before use.<br>III. Common Problems and Solutions<br>Problem 1: The Adhesive-back Does Not Stick Firmly<br>Check whether the installation surface is a smooth and seamless material. Rough surfaces such as painted walls and wallpapers will affect the adhesion. Do not use it on such surfaces.<br>If you need to reuse the adhesive-back, first heat the adhesive-back with a hair dryer for 10 - 15 seconds. After restoring the adhesion, repeat the above installation steps.<br>If the surface of the removed adhesive-back is attached with dirt such as dust and oil stains, the adhesion will be greatly reduced. It is recommended to replace it with a new adhesive-back.<br>If it becomes loose after installation, remove it immediately, clean the surface, and paste it again according to the steps. Be sure to wait for enough time before using it.<br>Problem 2: The Caliber Does Not Match the Toothpaste (The Toothpaste Cannot Be Installed)<br>First, check the product manual to confirm the applicable toothpaste caliber range of the toothpaste holder (e.g., common calibers are 15mm and 20mm), and check the size of the toothpaste tube opening of your own toothpaste.<br>If the toothpaste tube opening is slightly larger than the applicable caliber, you can try to gently rotate the toothpaste tube and slowly push it into the toothpaste holder. Avoid forced squeezing to prevent the tube opening from deforming.<br>Problem 3: The Toothpaste Cannot Be Squeezed Out<br>Check the squeezing structure of the toothpaste holder. See if there is any residual and solidified toothpaste causing jams. Use a toothpick or cotton swab to clean the residual paste in the squeezing channel.<br>Confirm whether the installation direction of the toothpaste tube is correct. Some toothpaste holders have markings for the fixed installation direction. The toothpaste outlet of the toothpaste tube should be aligned with the pushing direction of t<br><br>[ATTRIBUTES]<br>- High-concerned chemical: None<br>- Material: Plastic<br>- Origin: Mainland China<br>- High-concerned chemical: None<br>- Material: Plastic<br>- Origin: Mainland China