Automatic Handheld Electric Strapping Tool A compact, battery powered strapping tool designed for fast, secure PP and PE banding. The tool tensions, melts welds, and cuts excess strapping automatically, reducing time and physical effort for routine packaging and bundling tasks. Key benefits Fully automatic weld and cut: insert the strap, press the tension button, then press the welding switch. The tool tightens, melts welds, and trims excess strap without manual knots or clips. Faster and easier operation: tightening force and automated cycle allow a typical timber bundle to be strapped in under one minute. Lightweight and portable: the tool plus battery weighs only 6.6 lbs, making it easy to handle for users with limited strength. Adjustable tension for different loads: pulling force can be set from 900 to 3200 N using the manual adjustment knob to match package requirements. Long battery life and quick recharge: 4000 mAh rechargeable lithium battery charges in about 90 minutes, provides roughly 2 hours of operation, and can strap about 250 to 350 bands per full charge. Battery rated for up to 2000 charge cycles. Specifications and compatibility Compatible strap materials: PP and PE Compatible strap width: 11 to 16 mm (0.43 to 0.63 inch) Compatible strap thickness: 0.4 to 1.2 mm (0.01 to 0.04 inch) Pulling force range: 900 to 3200 N (adjustable) Battery: 4000 mAh rechargeable lithium, 90 minute charge time, about 2 hours runtime, 250 to 350 straps per charge Weight: approximately 6.6 lbs including battery How it works 1. Insert the strap around the package and feed the strap into the tool. 2. Press the tension button to tighten to the set force. 3. Press the welding switch to automatically melt weld and cut off excess strap. Operation is simple enough for non professionals while providing the force needed for heavy duty packing. Typical applications Bundling timber and lumber for transport or storage Securing pallet loads and heavy cartons in warehouses and distribution centers Strapping construction materials, pipes, or metal profiles on site What makes it practical Reduces physical strain and speeds up repetitive strapping tasks. Simple controls and adjustable tension let one operator handle both light and heavy duty jobs. Portable design and rechargeable battery allow use indoors or outdoors without a power source. This tool is intended for industrial and commercial strapping tasks where PP or PE bands within the stated size range are used. Follow standard safety procedures when operating heat and tension equipment.