Heavey Duty and Durable - The sprayer is constructed from high grade 304 stainless steel, no corrosion and leaking. The hose features double protection with a stainless steel casing and an EPDM inner tube, to get rid of leak problems. The T-valve adapter is made of brass for added strength with an anti-corrosion ceramic cartridge Modern and Fit Your Washroom Perfectly - The brushed nickel finish with the sleek body design, no scratch, makes this sprayer a good looking addition to your toilet Easy Installation - All necessary components to install the sprayer are included. The T-valve adapter allows you to integrate the sprayer into your water supply to the toilet tank neatly. You will be able to install this on your own in under 10 minutes, no plumber required. (Please note that your toilet tanks water inlet diameter should be about 0.75 (Standard G 1/2) Multippurpose Sprayer - This sprayer works great either as a cloth diaper washer, handheld bottom cleaner bidet, muslim shower and personal hygiene wash spray. The pressure of the water stream can be adjusted with the T-valve adapter to a level perfect for you. At the highest water setting, you will be getting a high pressure water stream which can be used to clean the toilet or potty. Some may use it to shower the pet, too Box Contains - Stainless steel bidet sprayer, Brass T-valve (T adapter ), Bidet holder with hook, Stainless steel hose 1.2m, Plumber tape, Screw set, Plastic gaskets Specification: Material of bidet sprayer: Stainless Steel Finish of bidet sprayer: Brushed Nickel Dimension of bidet sprayer: 120*55*21.5 mm / 4.72*2.16*0.85 in Material of T-valve: Brass Finish of T-valve: Chrome Dimension of T-valve: 53.5*69.7*62.5 mm / 2.1*2.75*2.46 in T-valve interface: Standard G 1/2 universal fit Length of hose: 1.2 m / 47.24 in Installation: Wall mount or Toilet tank mounted Box Contains: 1x Stainless steel bidet sprayer 1x Brass T-valve (T adapter ) 1x Bidet holder with hook 1x Stainless steel hose 1.2m 1x Plumber tape 1x Screw set 4x Plastic gaskets Note: Make sure that your toilet tanks water inlet diameter is about 0.75 (Standard G 1/2) for this set to be installed. Easy to use: Step 1 - Turn off the water supply for the toilet tankd and flush the toilet. Step 2 - Make sure there is a rubber washer inside all the female ends. Step 3 - Connect the T-Valve and the Hoses Screw the top of the T-valve onto the toilets fill valve where you just unscrewed the water supply hose. Be careful not to over-tighten the connections. Screw the toilets water supply hose to the bottom of the T-valve. Connect one end of the handheld bidet hose to the side of the T-valve. Screw the bidet sprayer head onto the other end of the bidet hose. Step 4 - Mount the Sprayer Turn On the Water Supply Turn the water supply valve back on. If you notice that any connection is loose or leaking, you may need to add some plumbers tape. If youre leak-free, your hand-held bidet sprayer is installed and ready for use Toilet Mount: Screw the holder onto the toilet tank clip. Lift up the toilet tank lid, slide the clip onto the side of the tank, and replace the lid. Wall Mount: Use the drywall screws and anchors to attach the holder to the wall.