Compression Sleeve Puller Tool Pipe Nut & Ferrule Remover Plumbing Tool

SPECIAL NOTE: When using the Compression Sleeve Extractor Removal Tool, we may encounter a slight dimensional error between the Compression Sleeve Nut and the Extractor Tool Bolt(or the Compression Sleeve Nut that needs to be replaced may be damaged), resulting in a less than 100% fit between the Nut and the Bolt. When this happens, please do not worry, it will not affect any disassembly or pulling operation. We can simply tighten the bolt to a depth sufficient to pull the compression sleeve out，No need to fully screw in bolts。Each product has been tested many times and is strong enough to pull out our compression fittings! [Coarse Thread Design]: Sleeve bolts with coarse thread design are suitable for: 4/5 - 5/6 nuts. Simply tighten the bolt to a depth (about 1.5") sufficient to pull out the compression sleeve without fully tightening the bolt. Easily disassembles and pulls out 【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool. Excellent Durable Quality: This Compression Sleeve Puller Tool is made of high-quality materials, not only has excellent corrosion and abrasion resistance, but also in the extreme case of severe corrosion or freezing of supply stops, you can still easily turn the lever to remove the old compression sleeve from the pipeline smoothly. How to use：1. Remove old compression fitting or old angle stop. 2. Align the copper pipe nut with the threaded mouth of the puller tool and tighten. 3. Make sure the ferrule puller is properly aligned with the pipe, then turn the handle 10 turns. 4. As you turn the handle, the compression ring puller pulls on the compression nut and rings to remove the nut and rings. Easy Removal of Compression Sleeves: This compression sleeve puller is designed for removing compression sleeves and rings from copper pipes, easily removes compression sleeves without damaging walls or pipes, a must-have plumbing tool for your plumber's toolkit. the compression sleeve puller is for 1/2” compression fittings only.