2670 Brushless Electronic Speed Controller 2-6SLipo Power Supply 70A Suitable for Multi-Axis UAVs

74,00 $ CA
+ 6,99 $ CA Livraison

2670 Brushless Electronic Speed Controller 2-6SLipo Power Supply 70A Suitable for Multi-Axis UAVs

  • Marque: Unbranded

2670 Brushless Electronic Speed Controller 2-6SLipo Power Supply 70A Suitable for Multi-Axis UAVs

  • Marque: Unbranded
Prix de vente conseillé : 104,00 $ CA
Prix : 74,00 $ CA
Vous économisez : 30,00 $ CA (28%)
Verkocht door:
74,00 $ CA
+ 6,99 $ CA Livraison

En stock

Nous acceptons les modes de paiement suivants

Description

Shop name:Chong Qing Shuo Yue Ke Ji You Xian Gong Si Adopting 32-bit high performance processor STM32G071, the working frequency is up to 64MHz, and it supports up to 128KHz motor PWM frequency. PCB adopts 8 layers of 3OZ immersion gold process, high power MOS combined with metal heat sink, high current load can also be effective heat dissipation, continuous and stable work. Support motor unidirectional, bidirectional, with brake and other motion modes. Support low voltage protection, temperature protection, blocking protection, current protection and other multiple protection. The ESC automatically detects the throttle signal when it is powered on, supports all signals, and at the same time supports signal protocols such as PWM, Oneshot and Multishot. BEC support output 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, 12V/3A adjustable, can be directly to the receiver, servo and other external equipment power supply, making the ESC more widely and flexibly applied. Model Name : SQESC 2670 Processor : STM32G071 Input Voltage : DC 7V-25.2V (2-6S Lipo) Continuous current (good heat dissipation) : 70A Maximum current (good heat dissipation): 110A Supported firmware : AM32 BLHeli_32 Firmware: SEQURE_G071_01 AM32 Firmware: SEQURE_G071 Signal protocol: (all), PWM, Oneshot, Multishot, etc. Programming: Support Throttle Calibration : Support Angle Setting : Support Current Detection : Support Telemetry Signal: Support Motor Steering Setting :Support RGB LED color light : Support BEC : 5V/4A, 6V/4A, 7.2V/4A, 8.2V/4A, 12V/3A adjustable Application Scenario: Multi-axis drone, fixed-wing aerial model, model boat, climbing car, model car, etc. Colour:Photo Color Material:plastic+metal Package Contents: 1 x Motherboard 2 x 18 Specification Heat shrinkable tube 28mm Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Identifiant Fruugo: 250120986-540841946
  • EAN: 4714056884700

Livraison & retours

Expédition dans un délai de 3 jours

  • STANDARD: 6,99 $ CA - Livraison entre mar. 30 septembre 2025–mer. 08 octobre 2025

Expédition de Chine.

Nous mettons tout en œuvre pour que les produits que vous commandez vous soient livrés dans leur intégralité et selon vos indications. Néanmoins, si vous recevez une commande incomplète, des articles différents de ceux commandés ou si, pour toute autre raison, la commande ne vous satisfait pas, vous pouvez retourner la commande ou tout produit inclus dans celle-ci et recevoir un remboursement complet des articles. Voir l'intégralité de la politique de retour

Détails de conformité du produit

Veuillez consulter les informations de conformité spécifiques à ce produit décrites ci-dessous.

Les informations suivantes sont fournies par le détaillant tiers indépendant vendant ce produit.

Fabricant:
Les informations suivantes indiquent les coordonnées du fabricant du produit concerné vendu sur Fruugo.

  • Hpcl Factory
  • hui zhou shi tang tang ke ji you xian gong si
  • Cheng Qu San Dong Zhen Zhu Yuan Lu 8 hao
  • Zhong Zhou Tian Yu Hua Yuan Di 10 dong 27 ceng 01 hao Fang
  • Hui Zhou
  • China
  • 516000
  • qingmingdo@outlook.com
  • 15363471640

Personne responsable dans l'UE:
Les informations suivantes indiquent les coordonnées de la personne responsable dans l'UE. La personne responsable est l'opérateur économique désigné basé dans l'UE qui est responsable des obligations de conformité relatives au produit concerné vendu dans l'Union européenne.

  • 0utong GmbH
  • 0utong GmbH
  • Brehmstr 56 40239 Duesseldorf
  • Brehmstr
  • Germany
  • 40239
  • info@outong.de
  • 4921131054698