1. This touch-sensitive river table module is made of high quality materials, stable and reliable, easy to install, no heat, low power consumption; 2. The thickness of the isolation sensor is about 3 centimeters, thethinner the thickness of the isolation, the higher the sensitivity;. 3. The maximum load can be connected to 5V 2A current within the light strip, can support 12V, with 12V power supply need to use 12V light strip; 4. Easy to use, easy to operate, connected to the power can be used; 5. Wide range of application, suitable for a variety of materials: wood plexiglass acrylic resin stone plastic cardboard, etc., does not apply to metal materials. Hign-concerned Chemical:None Type:Module Condition: Product name: river lamp power module Product size :32.4 x 38mm Input voltage: Support 5-24V, using the same voltage lamp and power supply Toggle switch: Powered by TYPE-C on this side of the DC seat, powered by DC socket on the side of the board Power supply interface :TYPE-C(5V) or DC socket (support 5V-24V) LED lamp power supply voltage: factory DC 5V(12V,24V power supply, use the same voltage lamp belt) Charging bank function: The module supports the function of charging bank, connects the battery, can directly supply power to the 5V lamp belt, You can also charge your phone with a TYPE-C cable. Charge and discharge voltage current: 5V2A Description: Only TYPE-C interface can be used to charge lithium batteries, DC seat does not support charging, The red light is on during charging, the red light is off after full charging, and the green light is on. Color: As Shown Material: PCB Package Contents: 1 * Module