Feature:1. Dehumidification is faster and realtime observation results are considerable to improve work efficiency.2. Using professional moistureproof originals, stable performance and complete functions.3. Antiinterference fault recall, dehumidification and moistureproof, stable and reliable.4. Intelligent temperaturecontrolled fan automatically adjusts the speed according to the temperature of the chassis, energysaving and silent.5. The moist air is sucked into the dehumidification air duct, and after passing through the semiconductor refrigerant, is condensed into ice and discharged out of the cabinet through the water pipe.6. Using digital display, the running status is clear, and the menustyle operation is convenient and easy to use.7. The integrated design is more convenient to use, and the appearance is neat and generous.8. The buttons are easy to operate, run fast and can make actions in time.Specification:Item Type: DehumidifierMaterial: IronVoltage: AC110~230V 50/60hzCurrent: 1AVolume: 210 x 120 x 55Temperature Range: 10~80Humidity Range: 30~90%RHDehumidification Capacity: 5m cabinet body, 24H water volume 300ML under the condition of 30/80%RHHow to Use: Manual/Auto Click to switch1. ManualIn manual mode is the control button for dehumidification/ventilation/heating, click on/off2. AutomaticIn automatic mode is the addition and subtraction value button, is the function selection button1. "-C-" means dehumidification, and the dehumidification function is turned on when the value is greater than this value2. "-H-" is heating, and the heating function is turned on if the value is less than this value3. "-F-" is ventilation, and the ventilation function is activated when the value is greater than this value(Note: The ventilation and heating functions need to be added with functional modules, and the built-in only has a switch relayMX485 Communication Protocol: Host computer receiving analysisFF 10 01 23 45 67 FDAnalysis: Begins with FF10 1 mode state, 0 is ventilation state01 0 is heating state, 1 is dehumidifying state23 23 is the tens and ones of the temperature45 4 is the decimal place of temperature, 5 is the tens place of humidity67 67 is the units and decimal places of humidityDF endsHost computer sending analysisFF 10 01 23 45 67 FDAnalysis: Start with F F1 0: 1 mode state, 0 is ventilation state0 1: 0 is heating state, 1 is dehumidifying state2 3: 23 Set value of ventilation4 5: Setting value of heating6 7: Dehumidification setting valueD F: Ends.Package List:1 x Dehumidifier 1 x Water Pipe1 x Temperature Probe1 x Gusset1 x User Manual 1 x Power CableNote:1. Be careful not to cover the heat dissipation holes and ventilation holes around the body, otherwise the performance will be reduced and the machine will run poorly;2. Do not spill the accumulated water from the bottom upside down to the main board above, which may cause a short circuit to damage the machine, etc.;3. If you don't use it for a long time, please clean the water inside and place it in a ventilated and cool place.