Description:This PDR T-bar puller is a lightweight glue tab pulling tool, intended to be used to repair pressure dents and any dents that are not sharp or creased.large dents.It is very easy to control,everyone can remove the dent easily by yourself.Features:1.Sliding hammer is more powerful for dent repair, conquer big dents.2.The principle is to stick the glue tabs on the dent and use tools to pull the tabs and lift the dent.3.A big dent needs a slide hammer or puller;small dent needs a mini dent lifter or pulling bridge.4.Different tabs for different dent lifter or slide hammer, work with all glue pullers.5.Use a slide hammer or dent lifter or other pulling tool to pry the dent, try several times.Specifications:Number of pieces: 19 (1pc T-Bar + 18 extraction tabs)Color: Silver + BlueType: PDR Tool SetPackage weight: 1250gFunction: Paintless Dent RemovalHow to use:1.Clean the dent with a clean damp cloth; 2.Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter the glue gun, connect the power source and preheat for 5 minutes;3. Use a suitable drawing gasket. A large tooth requires a large drawing gasket.4.Press the trigger and apply the drawing seal with extruded glue;5.Quickly place the drawing gasket with hot melt glue in the center of the dent, press lightly until the glue hardens and adheres;6.Align the T-shaped repairer and press the drawing joint with hot melt glue, pull the sliding rod back to pull the dent;7. Check with a dashboard. If the dent still exists, tap it lightly with a hammer or flattening pen;8. Clean the repaired area with a clean, damp cloth.Package Included:18x PDR Glue Pulling Tabs1x 2 in 1 Dent Removal T-Bar Tools