1. Modification scope: The spacing between the corresponding sockets of the motherboard is 2.54mm, and the plug of the front switch is a scattered terminal, not all integrated into a whole; 2. This extension switch has complete power on and restart functions, and the POWER LED and HDD LED are reflected on the external switch; 3. The frequently used power button is placed on the right side of the product, and the less frequently used restart button is placed on the left. The power indicator light is reflected in the colorful self-circulating light effect under the keycap (LED chip control), and the hard disk indicator light is viewed through the small hole in the middle of the product; 4. The keycap icon is light-transmissive, and there are colorful self-circulating LED lights under the two buttons. It cannot be modified by yourself. If you don't need the light, you can not connect the POWER LED line. Installation instructions:1. Directly connect the terminal wires of this switch to the corresponding positions of the F_PANEL socket on the motherboard, and only use the switch; 2. The switch can be placed in a suitable position as required, or the provided double-sided adhesive pad can be used to stick it to the required position; Specification:Without Adapter Color: Black Material: Aluminum+Plastic Package Contents: 1 x Desktop Computer Power Switch 2 x double-sided adhesive pads 2 x cable ties Specification:with Adapter Note:If you want to keep the switch restart function on the original front panel, you can use the provided adapter to split the flow (the one-to-two adapter is for the 2.54-pitch 9-pin socket), that is, each function is divided into two wirings with the same function, ensuring that the original function and the function on the external switch can be used; Color: Black Material: Aluminum+Plastic Package Contents: 1 x Desktop Computer Power Switch 2 x double-sided adhesive pads 2 x cable ties 1 x adapter Only the above package content, o