Features: Delicate and fashion smoking pipe, showing your unique taste. Made of high-quality materials, not contain any harmful objects. Detachable and compact design, easy to clean and carry. Durable and practical,it can be used repeatedly for a long time. A nice gift for your friends and yourself. Specification: Material: Resin Size: Approx.14 * 4 * 4.5cm/5.5 * 1.6 * 1.8 inch Weight: Approx.92g/3.2oz Package List: 1 * Tobacco Pipe How to clean the mouthpiece External cleaning: Wipe gently with a soft cotton cloth, especially the mouthpiece part of the cigarette holder. Since it is often held by the mouth, be sure to pay attention to hygiene. It is recommended to wash it with boiling water before use, then wipe off the water droplets with a paper towel or shake it for dry naturally. Internal cleaning: 1. If the internal cleaning of the core-changing cigarette holder is very simple, because it is filtered by the filter element, there is only a small amount of tar on the inner wall of the cigarette holder that may leak due to the tightness of the installation. Just wipe it with a paper towel or cloth strip. 2. The cleaning of the mouthpiece is mainly for the cleaning type cigarette holder, because this type of mouthpiece can be used repeatedly for cleaning, the cleaning process play a very important role in the use and filtration effect: Users are advised to do a simple wipe after using a half pack of cigarettes. Generally, when you feel it is tight, you need to clean it up during use. It is taken out in sections during cleaning, and it is particularly important to note that any type of cigarette holder should be pulled out in a spiral manner when it is pulled out, which has a great influence on the sealing effect of the protection of the mouthpiece, after being pulled out, it is wiped cleaned and filtered. The small hole is cleaned with a needle. If it has not been cleaned for a long time, it feels that the tar in the residual cigarette holder is hard to be cleaned. After being pulled out in sections, soak it in warm water of about 50 minutes. After soaking for about ten minutes, wipe it off, or put a little detergent to soak it. The method of cleaning must be used after the water is naturally dried, otherwise the smell of smoke oil will affect the mood. For the high-grade material, the cigarette holder needs special protection. Generally, it is wiped and cleaned with alcohol or brandy. However, immediately after cleaning, the alcohol component will be removed, and the plastic part of the mouthpiece will become brittle, so please use it with caution. Hardware cleaning copper head cleaning method: Generally, it is necessary to wash once if you smoke more than 10 cigarettes. 1. Remove the filter head (the built-in filter should be turned out with a key configured). The exposed filter head is directly turned out by hand. 2. Pull out the inner tube inside the filter head, you can see a lot of black tar. 3. Wipe clean with a paper towel, or rinse with water, or with alcohol, wipe dry. 4. Check whether the two small holes in the inner tube are unblocked; if there is any blockage caused by tar or other substances, you can use a toothpick or a small needle to insert it into the clear. (Note that if the hole is clogged, it is very difficult to smoke) 5. Put away the inner tube, cleaning is completed, installed, continue to use. .