Digital Grain Hardness Tester High Precision LCD Agricultural Instrument Research Test Wheat Rice 20kg196N Sclerometer Durometer                                   Model      AGW-20              Max. Load      20kg              196N              Load division value      0.01kg              0.1N              Load cell       Inner              Accuracy      ±2％              Power      3.7V Lithium battery              Charger time      4~6hours              Battery Continuous use      About 15 hours              Battery life      ≥300times              Charger       Input：AC 100-240V 50/60HZOutput：DC 5V 1000mA              Working temperature      5℃～35℃              Transport temperature      -10℃～60℃              Relative humidity      15％～80％RH              Working environment      No source and corrosive media around                                                           How to use it ?                     1 Turn on the instrument ,and enter into measurement interface, choose the real time mode or peak mode as your requirements.                     2 Put the grain on the platform(better vertical),and then rotate the wheel to move up until the grain break,at the same while ,the digital display show the testing value.                     3 If you need to test again,clean the platform ,and press “ZERO” to clear the screen,and do as the step 2.                     4 After testing, clean the testing platform,turn off ,put the clamp down ,put all accessories in the tool box for next usage.                                                                                                                                                        Note: 1.When the power is running low ,it need to charge 4~6 hours can be normal using. 2.Any error operation may damage the instrument or cause serious accident.This manual indicates important matters about how to prevent accidents and the usage of  instrument,please read this instructions carefully before using,keep it securely in preparation for reading again.