Basic product information: •• Operating manual Languages: Dutch, English, French, German, Polish, Portuguese, Spanish •• Primary colors: Grey •• Additional colors: Red •• Depth of device: 40 mm •• Height of device: 155 mm • • Width of device: 74 mm •• Weight of device: 155 g •• Material: Abs • Physical properties: •• Display type: LCD •• Backlight: No • Electrical data: •• AC Power: Basic accuracy: ± (1.5% Rdg + 3 digits) For 0 to 20 Ma , ± (2.0 % Rdg + 3 digits) for 200 Ma, ± (2.5 % Rdg + 5 digits) for 10 A Frequency range: 40 - 500 Hz Overload protection: 0.5 A / 600 V fuse in the Ua/Ma range, 10 A / 600 V fuse in the 10 A range Rms for sine wave value (average) •• AC voltage: Basic accuracy: ± (1.2 % Rdg + 3 digits) for 0 to 200 V, ± (1.5 % Rdg + 3 digits) for 600 V Input impedance: 10 Mohm Rms for sine wave value (average) Overload protection: 600 V DC or AC Rms Frequency range: 40 - 500 Hz •• Audible continuity measurement: Yes •• Audible continuity: <, 50 ohm Built-in buzzer sounds •• DC current: Basic accuracy: ± (1.2% Rdg + 2 digits) For 0 to 20 Ma , ± (1.5% Rdg + 2 digits) For 200 Ma, ± (2.0% Rdg + 3 digits) For 10 A Overload protection: 0.5 A / 600 V fuse in the ΜA/Ma range, 10 A / 600 V fuse in the 10 A range •• DC voltage: Basic accuracy: ± (1.0% Rdg + 2 digits) for 0 to 200 V, ± (1.2% Rdg + 2 digits) for 600 V Input impedance: 10 Mohm Overload protection: 600 V DC or AC Rms •• Diod test: Yes •• Diod test specifications: Test voltage: Approx. 1.8 V •• Transistor Test: Yes •• Transistor Test Specific: Hfe: Transistor HFE 0-1000 Test voltage: approx. 1.8 V •• AC measurements: 10 A, 20 Ma, 200 ma •• AC voltage measurements: 0-200 Mv, 2 V, 20 V, 200 V, 600 Mv •• DC measurements: 0-600 ΜA, 15 A, 6 A, 60 Ma, 600 Ma, 6000 ΜA •• DC voltage measurements: 0-200 Mv, 2 V, 20 V, 200 V, 600 V •• Resistance measurements: 0-200 Ohm, 2 Kohm, 2 Megahm, 20 Kohm, 20 Megohm, 200 Kohm •• Resistance Specifications: Basic Accuracy: ± (1.0% Rdg + 3 digits) for 0 to 200 Ohm, ± (1.0% Rdg + 2 digits) for 2 Kohm to 2 Mohm, ± (1.5% Rdg + 3 digits) for 20 Mohm Overload protection: 600 V DC or AC Rms Open circuit voltage: Approx. 0.6 V • Technical data: •• Safety rating: Cat Iii / 600 V •• Voltage tester Type: AC/DC •• Auto shut-off function: Yes •• Data retention function: Yes • Environmental data: •• IP rating: Ipx0 •• Place of use: Indoor only •• Maximum operating humidity: < 80% • Operating characteristics: •• Number of ranges: 23 •• Range setting: Manual • Power supply: •• Batteries included: Yes •• Number of batteries: 2 • • Low battery indicator: Yes •• Battery composition: Alkaline •• Battery Iec Size: Aaa (LR03, R03, Fr03, Hr03, Kr03, Zr03 ,24A, 24D, 24Lf, Um4, Micro, Mn2400, Mx2400, • Included) : •• Set Contents: Test Conduction Probe : Cat Iii 600 V - 12 A - 18 Awg - 70 Cm .