Digital Temperature Controller Thermostat Plug with Sensor for Reptile Incubator

A Backlit Display That Works in the Dark The upgraded 2.24 inch LCD screen on this digital temperature controller stands apart from many alternatives on the market. With its built-in backlight and clear operating indicator, you can check the controller status even in complete darkness, making it a practical choice for reptile enclosures, incubators and similar setups where conditions need monitoring at any hour. Heating and Cooling Control in One Unit This thermostat plug offers both heating and cooling functions, giving you flexible environmental control. The temperature range spans from -40°C to 120°C (-40°F to 248°F), and you can set start and stop temperatures to manage connected devices. When the start temperature is higher than the stop temperature, the unit operates in cooling mode; when it is lower, it switches to heating mode. The controller supports loads of up to 15A at 120V, equating to 1800W, and includes a 1.7 metre (5.6 ft) 10K temperature sensor probe for accurate readings. Five Operating Modes for Versatile Use Five modes are available to suit different scheduling needs. F01 provides cycle timing control, F02 offers countdown switch-on, F03 handles countdown switch-off, and F04 delivers timed switching. The timing range extends from 0 to 99 hours and 59 minutes, with accuracy to within 10 minutes. Temperature calibration is also supported, allowing adjustments between -9.9°C and 9.9°C to fine-tune readings. Practical Features for Everyday Use The controller includes a memory function that saves all current settings, plus a screen lock protection feature that switches off the display while retaining your configurations. A reset function restores default settings when needed. Celsius and Fahrenheit units can be toggled easily by holding the SET button until the temperature display changes. The EU plug design makes it straightforward to integrate into your existing setup.