Product details Lamp type: T6 + cob output power (maximum): operating time of 800 lumens (maximum): 3-5h Material: Aluminum Alloy Use the battery type: 1 * 26650/1 * 18650/3 * AAA Charger type used: USB loading port Function: 360-degree rotary lamp head (you can change the direction of The source of light and the light source at will), double switch 7 mode (the white switch controls the lamp beads T6 (strong low light-flash light), the red switch controls the COB lamp beads (intensity of the White Light) Light White Light Light Light Red Light Strong Flashing Red Light)), the charging indicator lights red during charging, full load and green light, USB input loading, tail magnet. Field of application: Outdoor lighting, work inspection lights, warning lights, adapted to a variety of lighting work environments. Speed position: White switch: White Fort Clear-White Low flashing Red Switch: Strong white light light light light Light light red light light red flashing flashing Material: Aluminum alloy + ABS plastic output power 800lumen size 160 * 48 * 34mm Execution time 3-5h battery type 1 * 26650/1 * 18650/3 * AAA weight 168g black color outer lighting :, LEDs job inspection, warning lights, load method: USB charging Scope: Suitable for a variety of lighting work environments Flashlight instructions one. Change instruction 1. The positive pole of the battery is turned inward (on the side of the pellet of the lamp) and the negative pole to the outside (tail). 2. The switch is at the rear, the switching function is the switching function and the slight pressure on the switch is the gradation function. two. Printed circuit instructions 1. Our torch adopts advanced stabilized and constant current voltage technology, which can effectively solve the requirement of the LED torch for a stabilized and constant voltage current. 2. Special advice: a. Do not use with overvoltage, and voltage should not exceed 4.2 V. b. The positive battery root is turned forward and not reverse, otherwise it will burn the plate. vs. Pay attention to the temperature change of the flashlight to ensure the dissipation of heat d. Non-professionals do not open the printed circuit 3. Warranty Description: Open or processed printed circuits are no longer covered by the warranty. three. Instructions for the lithium battery 1. Most flashlight batteries mainly use Lithium 18650 and 16340 batteries. 2. Lithium battery characteristics: Lithium batteries and mobile phone batteries have completely different load methods, lithium batteries have no memory and can be loaded at any time, do not overload and discharge. 3. The first charge lasts at least 6 hours, then the green light is lit according to the charger. It is not necessary to overload. 4. When they are not used, the natural discharge rate of lithium batteries releases about 1% or less of their load each day. Although it is slow, it should not be left too long. 5. Pay attention to the sealing, the anti-period and the anti-fall of the battery. 6. Special reminder to use the charger "to three events" with anti-overload, anti-return and anti-short circuit connection; 7. If the battery is not used for a long time, it must be fully charged and stored. Normally, it must be recharged and discharged again in about three months. 8. Description of the warranty: The warranty is no longer covered by the battery after leaving the factory. four. Instructions for using the flashlight 1. When using the torch, choose according to the voltage and battery requirements of the torch. Do not use it without discernment to avoid the depletion of the printed circuit. Do not use batteries of different models and voltages at the same time. 2. In use, turn off the torch when the brightness of the torch changes considerably to prevent excessive discharge from the battery. 3. Thermal dissipation skills: while using the flashlight, ensure thermal dissipation. It is strongly necessary that the second speed is used when the battery is fully charged, so that the lamp holder and the torch battery can extend the life of the product! Hold the torch firmly with your hand is a good way to dissipate heat; It is recommended to dispel the heat or turn off the torch on time depending on the heating conditions of the torch when it is lit. 4. Strengthen precautions for the description of the pocket lamp on waterproof and shockproof. 5. Keep the inner wall of the clean lamp housing. Do not wipe it with your hands or hard objects; To erase finger traces on the lens, you can gently wipe it with a cotton swab and a lens cleaner. 6. Do not head the torch light in the eyes of people, so as not to affect the view, especially children. 7. If you do not use the flashlight for a long time, please