Dual Power Automatic Transfer Switch 4P AC 100A Din Rail Mounted Electrical Toggle Controller

Feature: 1. TWO MODES: The dual power automatic transfer switch can be operated automatically or manually. Can switch without power interruption in milliseconds, ensuring the continuity, reliability and safety of power supply. Has a compact structure, trusted transmit, convenient installation and maintenance, and a long service life 2. CONTINUOUS POWER SUPPLY: When there is an abnormality in the normal power supply, the backup power supply will immediately work to ensure the continuous power supply. When the normal power supply is turned on, will automatically switch back from the backup power supply to the normal power supply 3. 35MM RAIL MOUNTING: This automatic transfer switch is suitable for 50 or 60Hz AC rated 100A emergency power supply systems, which is specially designed for household rail mounting and is specifically used for PZ30 distribution boxes 4. STRONG MATERIAL: The transfer switch is made of inflaming retarding PC material, which has good insulation, high temperature proof, and uses silver contacts to prevent aging. It is safe and trusted, greatly improving conductivity and service life 5. WIDE APPLICATION: The dual power toggle controller adopts exquisite craftsmanship, with isolation and interference prevention, self switching and self resetting, and stable, which is used in various situations where continuous power outages are not allowed, such as homes, shopping malls, factories, laboratories, breeding farms, etc. Specification: Item Type: Dual Power Automatic Transfer Switch Model: NLQ4 125 4P(F) Material: PC inflaming retarding and silver Specification: 4P Rated Current: 100A Frequency: 50 60HZ Grade: PC level Lifespan: Electrical: 2000 Times; Mechanical: 5000 Times Rated Short Circuit Current: 50kA Fusing: RT16 00 63A Auxiliary Circuit: Two Relays, Each With Two Sets of Contacts Capacity: 50HZ le=5y Touch Time: <50ms Operating Conversion Time: <50ms Return Time: <50ms Closing Time: <50ms. Package List: 1 x Dual Power Automatic Transfer Switch 4 x Connecting Wires 1 x User Manual Note: 1. The highest ambient temperature should not exceed 40 celsius , the lowest should not be lower than 5 celsius , and the average temperature within 24 hours should not exceed 35 celsius .2. The installation location should not be at an altitude higher than 2000m.3. When the maximum temperature reaches 40 celsius , the relative humidity at the installation site should not exceed 50percent ; when the temperature is at the lowest 5 celsius , the relative humidity is higher, for example: at a temperature of 25 celsius , the relative humidity is 90percent . 4. Due to temperature changes, special measures should be taken to deal with occasional condensation on the product appearance.