Feature:1. Convenient Operation: This power transfer switch can be operated automatically or manually, milliseconds switching without power supply, compact structure, reliable transmission, easy installation and maintenance, long life.2. Safe And Reliable: This dual automatic transfer switch will switch the backup power supply to work immediately when the normal power supply is abnormal, which ensures the continuity, reliability and safety of power supply.3. 35mm DIN Rail Mounting: This DIN rail mounted power transfer switch adopts 35mm DIN rail mounting, which is very simple and convenient to install.4. Excellent PC Material: This dual power automatic transfer switch is made of excellent PC material, which is sturdy, wear resistant, not easy to be damaged, and flame retardant.5. Wide Application: This dual power transfer switch has a wide range of applications and can be used for photovoltaic systems in homes, shopping malls, factories, laboratories, farms and other situations.Specification:Item Type: Dual Power Automatic Transfer SwitchProduct Model: NLQ3-125, 3PMaterial: PC Flame Retardant, Silver AlloySwitch Type: Secondary Power DistributionRated Current: 63AInsulation Voltage: AC690V ACRated Voltage: AC400V ACRated Frequency: 50Hz, 60HzElectrical Level: PC Grade IsolatedRated Shock Withstand Voltage: 8KVControl Circuit: Rated Control Voltage Us: AC110V 85% Us-110% UsAuxiliary Circuit: 2 Relays, Each relay has two sets of contacts. Capacity: AC110V50HZ le=5yTouch Time: <50msOperation Transition Time: <50msReturn Time: <50msClosing Time: <50ms.Package List:1 x Dual Power Automatic Transfer Switch1 x ManualNote:1. The maximum peripheral temperature should not exceed 40℃, the minimum should not be lower than ‑5℃, and the average temperature in 24 hours should not be higher than 35℃.2. The altitude of the installation site should not be higher than 2000m. 3. When the maximum temperature reaches 40℃, the relative humidity of the installation site should not be more than 50%. When the temperature is a minimum of ‑5℃, the relative humidity is higher, e.g., when the temperature is 25℃, the relative humidity is 90%. Due to temperature changes, special measures should be taken to deal with occasional condensation on the product surface.