Indicated for patients suffering from forward instability and a tendency to slide from the bed seat. These devices do not have specific indications and there are many reasons why it is necessary to use them. The patient's range of mobility can be adjusted thanks to the strap system. Choosing the right size is an essential element to obtain the therapeutic effectiveness of the product and guarantee its lifespan. Place the belt at abdominal level and surround the straps by holding the back of the chair or bed and fasten its closure. Adjust the belt to the size of the bed or chair and close with its clip closure . Although the inner part of the belt is made of soft fabric, and it is the one that is in contact with the patient, you should put the belt over a t-shirt or cape to avoid chafing. At the end, ensure the range of mobility you want to allow the patient and the correct fixation of all elements. Excessive compression can cause intolerance to the device or injury, c This is why it is important to properly regulate the degree of compression of the belt. In case of doubt or problem, we recommend that you have it examined or monitored by a healthcare professional or orthopedic technician. To wash the product, attach the clips together. The exterior area can be easily cleaned with a damp cloth. Hand or machine wash with neutral soap at a temperature of 30C. Do not use bleach or abrasive products. Tumble dry on low heat. Do not iron. Before use, please check the condition of the device's fixings.