Condition: Brand New Item Type: Centrifuge Material: PP Plastic Power: 40W Centrifugal Power: 1790g Rotation Speed: 0-4000 Rpm/Min Capacity: 20ml x 6 Time Range: 0-60 minutes or always on Power supply: AU standard AC220V10% 50HZ2% Weight: Approx. 3160g / 111.5oz Size: Approx. 25x22cm / 9.8x8.7in Usage: 1. When using, it should be layered on a uniform and stable table. 2. The allowable tolerance of load balance relative weight is not more than 0.5g. 3. The plastic protective tube should be cleaned with cloth after use to prevent corrosion; the temperature should not exceed 50 during cleaning. 4. After connecting the power supply, adjust the working time and turn the knob clockwise from "0" to the desired speed. Maintenance and Precautions: 1. Fill the motor with lubricant every 3 months. 2. When not in use, it should be stored in a dry room. 3. After long-term use, if smaller than 10mm, it should be replaced. 4. The plug and socket should have a good grounding wire. 5. The weight of the test tube and the test tube cover should be equal, and they cannot be used at the same time.1With 6 centrifugal tube apertures, which can be tested at a time, and the operation is simple and convenient. 2It can be used for quantitative analysis and qualitative analysis in the laboratory and is safe to use. 3Electric centrifuge, uses high?quality PP plastic material, which is durable and long service life. 4Can also be tested by medicine staff for the manufacture of serum, urea and vaccines. 5It is widely used in biology, medicine, chemistry, education, science, production, etc. 1 x Centrifuge 1 x English Manual